Panasonic PT-DZ570U 네트워크 매뉴얼 - 페이지 13
{카테고리_이름} Panasonic PT-DZ570U에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-DZ570U 42 페이지. Dlp based projector
Panasonic PT-DZ570U에 대해서도 마찬가지입니다: 사양 (4 페이지), 브로셔 (2 페이지)
NETWORK menu (continued)
2
Press ▲ ▼ to select an item, and change the setting according to the instructions.
NAME CHANGE
DHCP
_
(DHCP client function)
IP ADDRESS
_
(Display of IP address and setting)
SUBNET MASK
(Displaying and setting the subnet
mask)
DEFAULT GATEWAY
(Display of gateway address and
setting)
"Glossary" (
See page 40 – 41)
_
Note
A wired LAN and wireless LAN cannot be used in the same segment.
Select [NEXT] on the [WIRELESS LAN] screen (1/2) to switch to the [WIRELESS LAN] configuration screen (2/2).
Make the settings related to the wireless connection between the projector and the network.
Select [CANCEL] instead of [NEXT] to cancel the configuration change.
WIRELESS LAN
SSID
Panasonic Projector
MODE
AD HOC
AUTHENTICATION
OPEN
ENCRYPTION
NONE
CHANNEL
RETURN
NEXT
MENU SELECT
ADJUST
ENTER
●
SSID
_
Note
・
SSID has to be entered in alphanumeric letters.
・
You cannot set "any" or "ANY" for SSID.
●
MODE
AD HOC
_
INFRASTRUCTURE
"Glossary" (See page 40 – 41)
You can change the user name.
ON:
OFF: If a DHCP server does not exist in the network to which the
Enter the IP address if DHCP server is not used.
_
If not using a DHCP server, enter the subnet mask.
_
Enter the gateway address if DHCP server is not used.
2/3
11
CANCEL
:If the mode is [AD HOC], enter the same character string as that of SSID set on
the computer to be connected. If the mode is [INFRASTRUCTURE
SSID registered at the access point
:Select [AD HOC] or [INFRASTRUCTURE].
:Connect projector and computer directly without access point.
:Connect through access point.
_
If a DHCP server exists in the network to which the projector is
connected, the IP address will automatically be acquired.
projector is connected, additionally set [IP ADDRESS
[SUBNET MASK
] and [DEFAULT GATEWAY
_
.
_
13
],
_
].
_
], enter the
_