Panasonic PT-DZ870K 사양 - 페이지 3
{카테고리_이름} Panasonic PT-DZ870K에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-DZ870K 26 페이지. Panasonic projector
페이지 인쇄TM
DLP
Projector
Keystone correction range
Installation
Terminals
SDI IN
HDMI IN
DVI-D IN
RGB 1 IN
RGB 2 IN
3D SYNC 1 IN/OUT
3D SYNC 2 OUT
VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
As of September 2013
SFD13M004-2
PT-DZ870K/DZ870W/DZ870LK/DZ870LW
Vertical ±40°
When using only the KEYSTONE correction of the Geometric Adjustment
When using the optional upgrade kit ET-UK20*
When using both the KEYSTONE and CURVED corrections of the Geometric
Ceiling/floor, front/rear
BNC × 1,
HDMI 19-pin × 1, Deep Color, compatible with HDCP,
NOTE: Compatible with non-interlaced signals only.
DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible,
NOTE: Compatible with non-interlaced signals only.
BNC × 5
R, G, B
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Y, P
, P
(Y, C
, C
)
Y: 1.0 Vp-p (including sync signal), P
B
R
B
R
S-Video signal
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
D-sub HD 15-pin (female) × 1
R, G, B
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Y, P
, P
(Y, C
, C
)
Y: 1.0 Vp-p (including sync signal), P
B
R
B
R
BNC × 1, 1.0 Vp-p, 75 ohms
Input: TTL, high impedance. Output: TTL, max. 10 mA
BNC × 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
BNC × 1, 1.0 Vp-p, 75 ohms
D-sub 9-pin (female)
D-sub 9-pin (male) × 1 for link control
M3 jack × 1 for wired remote control
M3 jack × 1 for link control
D-sub 9-pin
(vertical ±30° with the ET-DLE085/DLE055, vertical +5° with
the ET-DLE030)
function: Vertical ±40°, horizontal ±15°
(vertical ±30° and horizontal ±15° with the ET-DLE085/DLE055)
Vertical ±45° and horizontal ±40°
(vertical ±22° and horizontal ±15° with the ET-DLE085/DLE055,
vertical +5° with the ET-DLE030)
Adjustment function: Vertical ±20°, horizontal ±15°
(vertical ±8° and horizontal ±8° with the ET-DLE085/DLE055)
3G-SDI signal: SMPTE ST 424 compliant
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant
525i(480i)*
, 625i(576i)*
, 525p(480p), 625p(576p), 750(720)/60p,
4
4
750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p,
1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p,
1125(1080)/50p
VGA (640 × 480) – WUXGA*
dot clock: 25 MHz –162 MHz
for single link only
525i(480i)*
, 625i(576i)*
, 525p(480p), 625p(576p), 750(720)/60p,
4
4
750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p,
1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p,
1125(1080)/50p
VGA (640 × 480) – WUXGA*
dot clock: 25 MHz –162 MHz
× 1 for external control (RS-232C compliant)
(female)
× 1 for external control (parallel)
:
3
(1,920 × 1,200),
5
(1,920 × 1,200),
5
/P
(C
/C
): 0.7 Vp-p, 75 ohms
B
R
B
R
/P
(C
/C
): 0.7 Vp-p, 75 ohms
B
R
B
R
(RS-232C compliant)
3 / 2 5