Panasonic PT-EX12KE 사용 설명서 - 페이지 19

{카테고리_이름} Panasonic PT-EX12KE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-EX12KE 27 페이지. Network operations, comercial use

Using Web Browser (continued)

E-mail setup page

With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be

sent to one or more preset e-mail addresses (maximum two addresses).

Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.

1 Select [Enable] to use the e-mail function.

2 Enter the IP address or server name of the e-mail

server (SMTP). The DNS server must be set if the

server name is entered.

3 Enter the e-mail address of the projector.

(maximum 63 characters)

4 The user can enter the location of, for example,

the installed projector so that the recipient may

easily identify the originator of the e-mail.

(maximum 63 characters)

1 Enter the E-mail Address1 of your desired recipient.

2 Select the conditions for sending e-mail.

MAIL CONTENTS:

ERROR:

LAMP1-2 RUNTIME:

INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in the field.

5 The user can modify the minimum time interval

6 Select the temperature of the intake sensor at

Select [NORMAL] or [SIMPLE].

An error is detected by self-diagnosis.

Remaining lamp service time has reached the value set in the field.

of temperature warning mail. The default value

is 60 minutes. In this case, the user cannot send

another mail for 60 minutes after sending previous

temperature warning mail even the set warning

temperature is reached again.

which to send a warning message.