Panasonic PT-EX12KU 사용 설명서 - 페이지 7
{카테고리_이름} Panasonic PT-EX12KU에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-EX12KU 27 페이지. Network operations, comercial use
Panasonic PT-EX12KU에 대해서도 마찬가지입니다: 브로셔 (6 페이지), 사양 (16 페이지)
페이지 인쇄
NETWORK menu (continued)
Network setup
You can make detailed wired LAN settings.
1
Press ▲ ▼ to select [Network setup], and press <ENTER> button.
The detailed [Network setup] screen will be displayed.
Input
PC adjust
Image select
Image adjust
Screen
Setting
Information
Network
Exit
Back
2
Press ▲ ▼ to select an item, and change the setting according to the instructions.
DHCP
(DHCP client function)
IP address
(Display of IP address and setting)
Subnet mask
(Displaying and setting the subnet mask)
Default gateway
(Display of gateway address and setting)
DNS
"Glossary" (See page 26)
3
Press ▲ ▼◄► to select [Set], and press <ENTER> button.
Save the current network settings.
Before using the DHCP server, make sure the DHCP server is already functioning.
For details of IP address, subnet mask, gateway and DNS, ask the network administrator.
Default wired LAN settings
The following settings are set before the projector leaves the factory.
DHCP
IP address
Subnet mask
Default gateway
DNS 1
DNS 2
Projector name
Network setup
Network control
Network status
Network factory default
Move
Next
On:
Off:
Enter the IP address if DHCP server is not used.
If not using a DHCP server, enter the subnet mask.
Enter the gateway address if DHCP server is not used.
Sets IP address of the DNS server.
Off
192.168.10.100
255.255.255.0
192.168.10.1
DHCP
IP address
Subnet mask
Default gateway
DNS1
DNS2
Exit
If a DHCP server exists in the network to which the
projector is connected, the IP address will automatically be
acquired.
If a DHCP server does not exist in the network to which
the projector is connected, additionally set [IP address
[Subnet mask
] and [Default gateway
Off
Set
Cancel
Adjust
Set
].
],
7