Panasonic PT-F200NTE 빠른 매뉴얼

{카테고리_이름} Panasonic PT-F200NTE에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-F200NTE 1 페이지. Secondary display transmission function
Panasonic PT-F200NTE에 대해서도 마찬가지입니다: 사용자 설명서 (49 페이지), 빠른 매뉴얼 (1 페이지), 고급 운영 매뉴얼 (33 페이지)

페이지 인쇄

Windows

(PT-F200NTU/PT-F200NTE/PT-F200NTEA)

(PT-F100NTU/PT-F100NTE/PT-F100NTEA)

(PT-FW100NTU/PT-FW100NTE/PT-FW100NTEA)

Installing the software and viewing the operating instructions

• Before installation, see "System requirements" at the upper right of this guide.

• Shut down all software currently active on Windows. Otherwise, installation may not

be possible.

• Administrator authority is required for installation.

• If Wireless Manager mobile edition (henceforth abbreviated to "ME") 1.0, 2.0 or 3.0

has been installed, uninstall it. (See the bottom left of this guide)

Set the supplied CD-ROM in the CD or DVD drive.

• The installer starts up

automatically and the

screen at right appears.

• If the installer does not start

up automatically, double-

click

[EasyInstall]

[Easy_Inst.exe] in the CD-

ROM.

Click a software or function name button.

[Wireless Manager ME 4.5] :

This software is used to send screen images from a computer to the projector via

a wireless or wired LAN. When installing this software, follow the instructions on

the screen.

[Installation Free Set Up] :

Although some are impossible, you can use the basic functions of Wireless

Manager ME 4.5 without installing it in the computer.

When using Wireless Manager ME 4.5 without copying the program

Click [Direct CD-ROM Startup] to launch Wireless Manager ME 4.5.

When copying Wireless Manager ME 4.5

(1) Click [Other Media Source Startup, Make Copy Here].

(2) Select the destination to save, and click [OK].

(3) Double-click the Wireless Manager ME 4.5 icon (WMstart.exe) in the

destination to launch Wireless Manager ME 4.5.

[Operating Instructions] :

The "Network Function Edition for Windows" and "Secondary Display Transmission

Function Advanced Operation " documents are stored in the supplied CD-ROM in

PDF file form. To see them, Adobe Reader (URL: http://www.adobe.com/) is

required. Click on a desired document name on the displayed list.

ENGLISH

Using network functions

For details of usage, see "Network Function Edition for Windows" in the supplied CD-ROM.

� Easy wireless set up

1 Launch Wireless Manager ME 4.5.

When the user

When the

name setting

confirmation

window

dialog window

appears

Set the icon and user name,

(1) Click [YES].

and click [OK].

(2) Set the icon and user name,

and click [OK].

If the icon and user name have already been set, the setting window does not appear. Go to step 2.

2 Select [Simple] or [Detailed] and follow the steps below.

Simple connection

Detailed connection

(searching for a computer

(searching for a projector

on the list displayed by

on the computer)

the projector)

(1) Turn on the power to the

(1) In [Network], select the same

projector unit.

network

(2) Press the [COMPUTER

displayed in the [WIRELESS

SEARCH] button on the

LAN] menu of the projector

remote control.

to connect.

(3) Select from the list displayed

(2) Select the projector to

by the projector an item with

connect.

the same icon/name as is

(3) Click [OK].

displayed on the computer.

3 Click [Live] on the launcher.

� Wired LAN connection

Network settings of the projector

10BASE-T,

and the computer are required.

100BASE-TX,

See "Network Function Edition for

1000BASE-T

Windows" in the supplied CD-

ROM.

Uninstalling Wireless Manager ME 1.0, 2.0 or 3.0:

From the desktop, select [Start] → [All Programs] → [Panasonic Wireless Display] → [Uninstall

Wireless Manager mobile edition

. ], and follow the instructions on the screen.

( .

is 1.0, 2.0 or 3.0.)

Network Function Quick Guide

→

TQDJ19062-1 (En) M0307-2067

TQDJ19096 (En)

When the network

adaptor selection

window appears

(1) Select the adaptor from the list

and click [OK]

(2) If the confirmation dialog window

appears, click [YES]

(3) Set the icon and user name, and

click [OK].

number

Used for normal presentations.

LAN cable

(straight,

Hub

100 m or less)

� System requirements

OS:

CPU:

RAM:

Empty hard disk capacity: 60 MB or more

Web browser:

Hardware conditions: CD or DVD drive

Wireless LAN:

Wired LAN:

Other:

• Note that operation is not guaranteed when used with system environments other than the

above or on homemade computers.

• Operation is not guaranteed for all computers that meet the above conditions.

• Operation is not guaranteed for all wireless LAN cards and built-in wireless LAN adaptors.

• It is forbidden to take the projector outside the country or region where you purchased it, so

use it only in the said country or region. Also, note that depending on countries or regions

there are restrictions on the channels and frequencies at which you can use the wireless

LAN.

• You must agree to the "Software Licensing Agreement" to use the supplied software. Please

read it carefully when it is displayed during installation.

URL : http://panasonic.co.jp/pavc/global/projector/

•

Microsoft and its logo as well as Windows and Windows Vista

Microsoft Corporation in the United States and/or other countries.

•

Intel and Pentium are registered trademarks or trademarks of Intel Corporation or its affiliates in the United States and other

countries.

•

Adobe Reader is a trademark of Adobe Systems Incorporated.

S1207-0A

� Other examples of usage

<4-screen multi style>

LAN cable

(straight,

100 m or less)

See "Network Function Edition for Windows" in the supplied CD-ROM.

Microsoft Windows 2000 Professional/XP Home Edition/XP Professional

Microsoft Windows Vista

Ultimate 32 bit/Vista

Microsoft Windows Vista

Home Premium 32 bit/Vista

Wireless Manager ME 4.5 can be installed with Windows Vista

secondary display transmission function cannot be used.

Intel

Pentium

III 600 MHz or faster or compatible processor

(800 MHz or faster is recommended when using live mode)

256 MB or more

Internet Explorer 6.0 or newer

Netscape Communicator 7.0 or newer

Wireless or wired LAN function

An 802.11 b/g built-in wireless LAN system or an 802.11 b/g wireless LAN

adaptor must be installed and running properly. However, some 802.11 b/g

wireless LAN may not allow connection to 802.11 g projectors.

When your computer has no built-in wireless LAN function, a wireless LAN

card driver must be installed and recognized properly.

(Wireless LAN cards that system operation capabilities are confirmed :

Access http://panasonic.co.jp/pavc/global/projector/)

If Network Bridge in Windows XP or firewall in Windows XP SP1 or later is

enabled, this will prevent a wireless connection. For details, see "Network

Function Edition for Windows" in the supplied CD-ROM.

A built-in LAN terminal (10BASE-T, 100BASE-TX or 1000BASE-T) or a

wired LAN adaptor must be running properly.

A LAN cable to connect must be compatible with category 5 or above

(category 5e or above when using 1000BASE-T). Consult your system

administrator when selecting a straight or crossover type.

When security (firewall) software and utilities for network cards are

installed, these may prevent connection of the projector.

are either registered trademarks or trademarks of

The projectors illustrated as examples are PT-F100NTU.

<4-screen index style>

The small-screen

layout is the example

of PT-F100NTU.

PT-F200NTU

Screen before

operation

Moving the cursor outside the

computer screen with the mouse

Access point (AP)

Business 32 bit

Home Basic 32 bit

, but the

PT-F200NTU

<16-screen index style>

Screen after

operation

LAN