Panasonic PT-FW100NTEA 사용자 설명서 - 페이지 13

{카테고리_이름} Panasonic PT-FW100NTEA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-FW100NTEA 49 페이지. Secondary display transmission function
Panasonic PT-FW100NTEA에 대해서도 마찬가지입니다: 사양 (6 페이지), 빠른 매뉴얼 (1 페이지), 빠른 매뉴얼 (1 페이지), 고급 운영 매뉴얼 (33 페이지), 사양 (6 페이지)

페이지 인쇄

Connecting with wireless LAN

In [Network], select the same network number as is displayed in the [WIRELESS

LAN] menu of the projector to connect.

Projectors powered on in the chosen network group are listed.

Select the desired projectors, and click [OK].

[

] appears in the menu bar and a connection is established with the projector.

("Menu description"

• Easy Wireless Set Up cannot be made between the projector and the computer. (See page 46)

• Automatic connection setting (See page 26)

※1

• In the following situation, connections other than [U] are not possible.

- When not installed in the [Applications] folder

• Depending on the computer and wireless LAN card used, Easy Wireless Set Up may not be possible. If this is the case,

the [Network] setting of <Select Access Port> window will be switched to [U] automatically. For details of the connection

procedure, first close Wireless Manager ME 4.5, and then refer to page 15.

※2

• The initial network number for both the projector and Wireless Manager ME 4.5 is [1]. These numbers must match for the

connection. To check the network number, refer to the network menu of the projector.

• Although WEP (Wired Equivalent Privacy)

network numbers [2] through [4], so set [2] through [4] if security is to be emphasized.

• Important image data is protected because AES

even if [ENCRYPTION] is set to [NONE].

• Other network adapters may not be usable under Easy Wireless Set Up connections.

• Connections to other networks connected through the wireless LAN card are broken under Easy Wireless Set Up

connections.

※ "Glossary" (See page 45)

See page 21)

※

is not set for network number [1], WEP (Wired Equivalent Privacy)

※

encryption processing takes place in advance for all network numbers,

(cont.)

※

is set for