Panasonic PT-JX200WE 설치 지침 매뉴얼 - 페이지 25

{카테고리_이름} Panasonic PT-JX200WE에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-JX200WE 30 페이지.

Installation (continued)

Connecting the power cord to the projector

This section describes connecting the supplied power cord to the projector.

To prevent the disconnection of the power cord, firmly insert the connector all the way into the <AC IN>

socket of the projector and then secure it in place.

For details on the handling of the power cord, refer to "Read this first!" ( page 3).

<AC IN> socket

Connector

Guide

Connector secure

ⅱ

lock

ⅰ

Guide

Tab

String

Adapter cover

1) Check the shapes of the <AC IN> socket of the

2) Attach the connector secure lock.

Connector secure

lock

Ribs

Connector

Power supply

unit

3) Hook the string of the adapter cover to the

projector and the connector of the power cord

and then orient the connector correctly and

insert it firmly.

z Attach the connector secure lock by sliding it

along the guides on both sides of the <AC IN>

socket of the power supply unit.

When attaching it, make sure that the connector

of the power cord fits further inside (power

supply unit side) than the ribs on the connector

secure lock.

connector secure lock.

z Hook the string that was attached to the adapter

cover beforehand to the connector secure lock

as shown in the figure on the left.

ENGLISH - 25