Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls 사용 설명서 - 페이지 20
{카테고리_이름} Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls 33 페이지. Micro portable wireless xga lcd projector
Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls에 대해서도 마찬가지입니다: 사양 (4 페이지)
페이지 인쇄
CONTRAST
This adjusts the contrast of the
picture. (Adjust the "BRIGHT"
setting first if required before
adjusting the "CONTRAST" setting.)
The picture is bright: I button
H button
The picture is dark:
BRIGHT
This adjusts the darker areas (black
areas) in the picture.
Black areas are too light: I button
Dark areas are too solid: H button
COLOR
(S-VIDEO/VIDEO/YP
P
only)
B
R
The color is too deep: I button
The color is too pale: H button
TINT
(NTSC/NTSC 4.43/YP
P
only)
B
R
This adjusts the flesh tones in the
picture.
The flesh tones are greenish:
I button
The flesh tones are reddish:
H button
SHARPNESS
To soften the picture details:
I button
To sharpen the picture details:
H button
COLOR TEMP.
C O L O R T E M P .
S T A N D A R D
[
H I G H
[
L O W
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
38-E
NGLISH
White balance R/G/B
(W-BAL R/G/B)
(RGB only)
This is used to adjust the white
areas of the picture if they appear
colourised.
To make the selected color lighter:
I button
To make the selected color stronger:
H button
AI
ON
The lamp is controlled according to
the input signals to project images
with the best quality.
OFF
"AI" is disabled.
NOTE:
B "AI" is disabled when "LAMP
POWER" is set to "LOW".
(Refer to page 45.)
TV-SYSTEM
(S-VIDEO/VIDEO only)
T V - S Y S T E M
A U T O
[
N T S C
[
N T S C 4 . 4 3
[
P A L
[
P A L - M
[
P A L - N
[
S E C A M
This should normally be set to
"AUTO". If the signal is of such poor
quality that the correct format
cannot be automatically
distinguished, change the setting
manually to the required TV system.
NOTE:
B When set to "AUTO", the
projector automatically
distinguishes between
NTSC/NTSC 4.43/PAL/PAL60/
PAL-M/PAL-N/SECAM signals.
STILL MODE
(S-VIDEO/VIDEO only)
To reduce flickering of still images
(vertical flicker), set "STILL MODE"
to "ON".
NOTE:
B Set to "OFF" when playing
back moving images.
SIGNAL MODE
(RGB/YP
P
/NETWORK only)
B
R
This displays the type of signal
which is currently being projected.
Refer to the list on page 60 for
details on each type of signal.
Projecting sRGB-
compatible pictures
sRGB is an international color
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colors in sRGB-
compatible pictres to be reproduced
more faithfully, make the following
settings.
# Press the F F or G G button to
select "PICTURE MODE", and
then press the I I or H H button
to select "NATURAL".
$ Press the STD (standard)
button on the remote control
unit.
% Press the F F or G G button to
select "COLOR TEMP.", and
then press the I I or H H button
to select "STANDARD".
NOTE:
B sRGB is only enabled when
RGB signals are being input
(when "LAMP POWER" is set
to "HIGH" and "AI" is set to
"OFF").
E
-39
NGLISH