Panasonic PTL592U - LCD PROJECTOR 사용 설명서 - 페이지 26

{카테고리_이름} Panasonic PTL592U - LCD PROJECTOR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PTL592U - LCD PROJECTOR 48 페이지. Panasonic pt-l592u operating instructions

페이지 인쇄

Adjusting the picture position

If the picture is not correctly positioned within the display area of the screen so that part of the edge of the picture

does not appear, adjust the position of the picture.

The adjustment procedure below describes the on-screen displays when a signal is being input to the S-VIDEO IN

terminal or the VIDEO IN terminal.

Adjustment procedure <for horizontal position adjustment>

1. Press the MENU button to display the MENU screen.

2. Press the " " and " " buttons to select " POSITION" .

3. Press the " <" and " >" buttons to display the POSITION screen.

NOTE:

If the STD (Standard) button is pressed while the POSITION screen at right is

being displayed, the letters " STD" will be displayed in yellow in the top-right

corner of the screen and all items displayed will be reset to the factory pre-

settings. Furthermore, the values and bar displays for items which have

returned to the factory pre-settings will be displayed in yellow.

4. Press the " " and " "

To adjust the vertical position of the picture, select " V-POSI" instead.

5. Press the " <" and " >" buttons to display the H-POSI individual adjustment screen.

6. Continue pressing the " <" and " >" buttons to adjust the H-POSI setting. The

current setting will be displayed on the screen by numerals and a bar.

The adjustment range is between 0 and 95.

If the ">" button is

pressed, the

picture moves to

the right.

If the ">" button is

pressed, the

picture moves up.

NOTE:

If approximately five seconds pass without any buttons being pressed while an individual adjustment screen is

being displayed, the display will return to the POSITION screen.

Press the MENU button to return to the POSITION screen or to clear the MENU screen.

If the STD (Standard) button is pressed while one of the individual adjustment screens is being displayed, the

value and the bar display will be appeared in yellow and only the item displayed will be reset to the factory pre-

setting.

buttons to select " H-POSI" .

Adjustment func-

tion display

Numeric adjustment

level display

If the " <" button is

pressed, the

picture moves to

the left.

If the "<" button is

pressed, the picture

moves down.

-25-

Bar display