Panasonic PTLC56U - LCD PROJECTOR 사용 설명서 - 페이지 12
{카테고리_이름} Panasonic PTLC56U - LCD PROJECTOR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PTLC56U - LCD PROJECTOR 32 페이지. Commercial use
Panasonic PTLC56U - LCD PROJECTOR에 대해서도 마찬가지입니다: 사양 (4 페이지), 사용 설명서 (37 페이지)
페이지 인쇄
Starting to use
Before turning on the power
1, Ensure that all components
are connected properly.
2, Connect the accessory power cord.
3, Remove the lens cover.
$
POWER
INPUT
VIDEO
RGB
&
AUTO
MENU
SETUP
ENTER
FREEZE
SHUTTER
(
STD
VOLUME
D.ZOOM
INDEX
WINDOW
PROJECTOR
Lens cover
Press the MAIN POWER switch to turn on the
#
power.
BThe power indicator on the projector will illuminate red.
$
Press the POWER button.
BThe power indicator on the projector will flash green. After a short
period, the indicator will illuminate green, and a picture will be
projected.
%
Turn on the power of all connected devices.
BStart the Play function of a device such as a DVD player.
NOTE:
B A tinkling sound may be heard while the power indicator is turned off,
but this is not a sign of a malfunction.
22-E
NGLISH
Power cord
#
Power indicator
)
*
'
&
Press the input select button to select the
input signal.
Input select
buttons
Changing
signals
BA picture will be projected in accordance with the selected input signal.
Follow the procedure below when you set the projector up first, and when
you change the setup place.
Adjusting the angle
'
BWhile pressing the adjuster
buttons, adjust the forward/back
angle of tilt of the projector.Adjust
so that the projector is as vertical to
the screen as possible.
Press the AUTO SETUP button to initiate
(
automatic positioning.
BThe tilt of the projector and the input
signal will be detected and keystone
distortion and the position of the
image will be corrected.
(Refer to page 26 for details.)
)
Adjusting the size
BTurn the zoom ring to adjust the size of the projected image.
Adjusting the focus
*
BTurn the focus ring to adjust the focus of the projected image.
VIDEO
RGB
AUTO SETUP
E
-23
NGLISH