Panasonic PTLC80U - LCD PROJECTOR 사용 설명서 - 페이지 10

{카테고리_이름} Panasonic PTLC80U - LCD PROJECTOR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PTLC80U - LCD PROJECTOR 37 페이지. Commercial use
Panasonic PTLC80U - LCD PROJECTOR에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지)

페이지 인쇄

Projector position

Top edge of screen

Screen

Bottom edge of screen

Screen

Projection distances

Projection distance (L)

4:3 Screen

PT-LC80U

size

Wide

Telephoto

(diagonal)

(LW)

(LT)

0.84 m(33˝)

1.1 m(3´7˝)

1.02 m(40˝)

1.2 m(3´11˝)

1.4 m(4´7˝)

1.27 m(50˝)

1.5 m(4´11˝)

1.7 m(5´6˝)

1.52 m(60˝)

1.8 m(5´10˝)

2.1 m(6´10˝)

1.78 m(70˝)

2.1 m(6´10˝)

2.4 m(7´10˝)

2.03 m(80˝)

2.4 m(7´10˝)

2.8 m(9´2˝)

2.29 m(90˝)

2.7 m(8´10˝)

3.2 m(10´5˝)

2.54 m(100˝)

3.0 m(9´10˝)

3.5 m(11´5˝)

3.05 m(120˝)

3.6 m(11´9˝)

4.2 m(13´9˝)

3.81 m(150˝)

4.5 m(14´9˝)

5.3 m(17´4˝)

5.08 m(200˝)

6.0 m(19´8˝)

7.1 m(23´3˝)

6.35 m(250˝)

7.5 m(24´7˝)

8.9 m(29´2˝)

7.62 m(300˝)

9.0 m(29´6˝) 10.7 m(35´1˝)

NOTE:

B The dimensions in the table above are approximate.

B If you use the projection distance for the 16:9 screen,

the 4:3 projection image overflows the screen at the top

and bottom.

B For details about projected image distances, refer to

page 59.

18-E

NGLISH

<Units: mm (inch)>

Projection distance

SH: Image height

SW:Image width

H1: Distance from center

of lens to bottom edge

of projected image

Height

PT-LC76U/PT-LC56U

position

Wide

Telephoto

(H1)

(LW)

(LT)

1.1 m(3´7˝)

0.08 m(3-1/8˝)

1.2 m(3´11˝)

1.4 m(4´7˝)

0.09 m(3-17/32˝)

1.5 m(4´11˝)

1.8 m(5´10˝) 0.11 m(4-5/16˝)

1.8 m(5´10˝)

2.1 m(6´10˝) 0.14 m(5-1/2˝)

2.1 m(6´10˝)

2.5 m(8´2˝)

0.16 m(6-9/32˝)

2.4 m(7´10˝)

2.9 m(9´6˝)

0.18 m(7-1/16˝)

2.8 m(9´2˝)

3.2 m(10´5˝) 0.20 m(7-27/32˝)

3.0 m(9´10˝)

3.6 m(11´9˝) 0.22 m(8-21/32˝)

3.7 m(12´1˝)

4.3 m(14´1˝) 0.26 m(10-7/32˝)

4.6 m(15´1˝)

5.4 m(17´8˝) 0.33 m(12-31/32˝)

6.1 m(20´)

7.3 m(23´11˝) 0.44 m(17-5/16˝)

7.6 m(24´11˝) 9.1 m(29´10˝) 0.55 m(21-5/8˝)

9.2 m(30´2˝) 11.0 m(36´1˝) 0.66 m(25-31/32˝)

Connections

Notes on connections

B Read the instruction manual for each system component carefully before connecting it.

B Turn off the power supply for all components before making any connections.

B If the cables necessary for connecting a component to the system are not included with the component

or available as an option, you may need to fashion a cable to suit the component concerned.

B If there is a lot of jitter in the video signal which is input from the video source, the picture on the

screen may flicker. In such cases, it will be necessary to connect a TBC (time base corrector).

B Refer to the list on page 58 for details on compatible signals which can be

input to the projector.

B Only one audio system circuit is available for the AUDIO IN L-R jacks, so if you wish to

change the audio input source, you will need to remove and insert the appropriate plugs.

Example of connecting to video equipments

Computer for control use

D-sub 15 (male) - BNC5 (male) adapter cable

Red (connect to P

Blue (connect to P

Green (connect to Y signal connector)

DIN 8-pin

(male)

DVD player

NOTE:

B If the video signal source is connected using a cable with a BNC connector plug, use a

BNC/RCA adapter (sold separately) to convert the cable end to an RCA plug-type jack.

B If the signal cables are disconnected or if the power supply for the

computer or video deck is turned off while the digital zoom or index

window functions are being used, these functions will be cancelled.

signal connector)

DVD player

Video deck

-19

NGLISH