Panasonic PTST10EA - LCD PORJECTOR 네트워크 운영 매뉴얼 - 페이지 14
{카테고리_이름} Panasonic PTST10EA - LCD PORJECTOR에 대한 네트워크 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PTST10EA - LCD PORJECTOR 19 페이지. Ptst10e user guide
페이지 인쇄
Using WebBrowser
E-mail set up
You can specify two email recipients.
Click [Detailed set up] → [E-mail set up] in the menu.
•
[MAIL SERVER]
ENABLE :
SMTP SERVER NAME : Enter the SMTP server name.
•
[MAIL OPTION]
MAIL FROM :
MEMO :
•
[TEMPERATURE WARNING SET UP]
MINIMUM TIME :
INPUT AIR TEMPERATURE : Select the temperature of the intake sensor
•
[E-MAIL ADDRESS]
E-MAIL ADDRESS :
MAIL CONTENTS :
ERROR :
LAMP RUNTIME :
INPUT AIR TEMPERATURE : Select ON to send email when the temperature set in [TEMPERATURE WARNING SET UP] is
PERIODIC REPORT :
When [submit] is clicked, the settings are applied.
Consult your system administrator on MAIL SERVER and E-MAIL ADDRESS settings.
Ping test
You can confirm if a network connection is established with Mail server,
POP server, DNS server or the like.
Click [Detailed set up] → [Ping test] in the menu.
Input IP address :
If succeeded in connection, the following display appears.
If failed in connection, the following display appears.
(cont.)
Enable or disable email transmission.
Enter the sender's email address.
Enter a description of the sender.
Enter the interval for sending email.
at which to send a warning message.
Enter the email addresses of the recipients.
Change the type of message as desired.
When sending messages to mobile phones, select "SIMPLE".
Select ON to send email when errors occur.
Select ON to send email when "at REMAIN" is reached.
exceeded.
Send a message with the projector status at the selected date and time.
Enter the IP address of the server you want to
test, and then click [Submit].
14