DiamondBoxx M3 매뉴얼 - 페이지 6

{카테고리_이름} DiamondBoxx M3에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DiamondBoxx M3 12 페이지.
DiamondBoxx M3에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지)

TWS (True Wireless Stereo) Button

This controls the TWS (True Wireless Stereo)

system on the DiamondBoxx. This is used to con-

nect two DiamondBoxx 2nd generation or later

together wirelessly in a split stereo pair for an

amazing, headphone like stereo experience.

To USE TWS System

1. Start with both DiamondBoxxes powered OFF.

2. Power up one of the DiamondBoxx, pair your Blue-

tooth device with it. Start streaming some music to it.

3. Power up the 2nd DiamondBoxx

4. Now go back to the 1st DiamondBoxx, press and

hold the TWS button until the Diamond starts flashing

BLUE

then release button. This will set this Diamond-

Boxx to "MAIN" speaker which will receive and play

LEFT audio only.

5. Now go to the 2nd DiamondBoxx, press and hold

the TWS button until the Diamond starts flashing

GREEN

then release button. This will set this

DiamondBoxx to "SECONDARY" speaker which will

receive and play RIGHT audio only.

6. Wait for up to 2 minutes for the DiamondBoxxes to

configure themselves and form a secure connection.

NOTE: The maximum distance between the MAIN and

SECONDARY DiamondBoxxes should be less than 50

feet with a unobstructed path of each other.

obstructions like walls and human bodies exist

between the two DiamondBoxxes the max range

could be shorter than 50 feet.

Tip: Raising the DiamondBoxxes off the ground/floor

may help extend the range.

8. If the TWS linking procedure didn't work, press and

hold the TWS button until the Diamond turns RED,

this will CLEAR the TWS memory. Do this to both

units and start procedure again from Step 1.