DiamondCore Tools CINK 사용자 설명서 - 페이지 11
{카테고리_이름} DiamondCore Tools CINK에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DiamondCore Tools CINK 14 페이지. Self-contained system for cleanup of clay, clay water, pottery tools and accessories
DiamondCore Tools CINK에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지)
페이지 인쇄TROUBLESHOOTING
Pump won't turn ON.
Check that plug is
plugged into an outlet
with power. There should
be a red light on the
GFCI if there is power.
Try resetting it.
Still nothing?
1
Basin Not Draining
Stop The CINK and allow
water to drain. Check that
all 3 O-rings (on lids
and blue filter) are intact
and unobstructed.
Was extra water
added to The CINK?
Yes
Remove excess water
and try again.
Pump Issues
Low Pressure/Humming.
When valve is turned ON,
does any water come out?
Yes
Check and ensure all lids
and big blue filter are
STRAIGHT and TIGHT
and all 3 O-rings intact
humming noise?
and unobstructed.
2
Low pressure?
Clean all buckets
and filters.
1
1
2
No
TROUBLESHOOTING
With valve OFF, pump keeps
running continuously or
No
Continuously
Pump still
Check 6.5-gal.
makes an
bucket has
water >1/3 full.
extra quiet
1
Bucket Lid Leaking
Ensure lid is screwed on
level and tight. Be care-
ful not to crossthread.
Still leaks?
Yes
Check that all 3 O-rings
(lids and blue filter) are
intact and unobstructed.
Replace if needed.
Still unresolved?
1
Call us at 619-905-9400.
Pump won't turn OFF.
intermittently.
Intermittently
Check valve is
fully turned OFF.
1
Check for leaks
around faucet.
1
2
1
Repeat the step twice to
2
potentially resolve the issue.
11
| 619-905-9400