Panasonic RX-D50 사용 설명서 - 페이지 10

{카테고리_이름} Panasonic RX-D50에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic RX-D50 12 페이지. Portable stereo cd system
Panasonic RX-D50에 대해서도 마찬가지입니다: 사용 설명서 (24 페이지), 사용 설명서 (28 페이지), 사용 설명서 (14 페이지)

페이지 인쇄

Using sound effects

Changing the sound quality

Preset EQ

Press [PRESET EQ] (main unit: [SOUND EQ]) repeatedly

to select your desired setting.

EQ1 (HEAVY)

EQ2 (CLEAR)

EQ3 (SOFT)

EQ4 (VOCAL)

EQ OFF

BASS or TREBLE

Enables you to enjoy the lower or higher pitch sound.

Press [BASS] or [TREBLE] to select your desired

setting.

Press [2/3] or [5/6] to adjust the level.

✒

Note

• The level of the pitch is between -4 to +4.

• Select "EQ OFF" to cancel BASS or TREBLE.

RE-MASTER

This feature reproduces the frequencies lost during recording

(original soundtrack) to give you a sound closer to the original.

Press [RE-MASTER] repeatedly to select either "ON R.M"

or "OFF R.M".

Enhancing the stereo sound: Sound virtualizer

Enables you to add natural width and depth to the stereo

sound.

Press [SOUND VIRTUALIZER] to display "

button again to cancel.

✒

Note

• Recording is not affected by this feature.

• The actual effect depends on the source played.

Adds punch to rock

Clariﬁ es higher frequencies

For background music

Adds gloss to vocal

Cancels the EQ selection

". Press the

Using other optional equipments

Connecting to a portable audio equipment

This feature enables you to enjoy music from a portable audio

equipment.

Audio cord

(not included)

Portable audio equipment

(not included)

Playing a portable audio equipment

Switch off the equalizer function (if there is any) of the portable

audio equipment before you plug into the MUSIC PORT jack.

Otherwise, sound from the speaker may be distorted.

Plug the audio cord into the MUSIC PORT jack.

Press [MUSIC PORT].

Play the portable audio equipment. (See the portable

audio equipment's instruction manual.)

Level adjustment

You can select the sound input level of your portable audio

equipment.

Press [INPUT LEVEL] to select your desired setting.

HI (high)

✒

Note

Select low if the sound is distorted when level high is activated.

LO (low)