Panasonic RXD10 - RADIO CASSETTE W/CD 사용 설명서 - 페이지 7
{카테고리_이름} Panasonic RXD10 - RADIO CASSETTE W/CD에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic RXD10 - RADIO CASSETTE W/CD 16 페이지. Panasonic porrtable stereo cd system operating instructions
Panasonic RXD10 - RADIO CASSETTE W/CD에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 사용 설명서 (9 페이지)
페이지 인쇄
1
3 5
7
1
2
3
4
5
6
7
2
4 6
Preset channel
Presetting radio broadcasts
•
Up to twelve FM and AM stations each can be programmed.
•
If broadcast frequencies are preset in the memory, you can easily
tune in any of these frequencies.
•
You can preset just those stations you like.
Set [
] to "TUNER".
1
Press [BAND] to select "FM" or "AM".
2
Every time you press the button: FM
Press [MEMORY].
3
"
" and the frequency flash.
While "
" and the frequency are flashing:
4
Press [–/g] or [f/
station.
"
" lights when an FM stereo program is being received.
Reference
You can select the desired broadcast by using "Automatic
tuning". (See page 9.)
Press [MEMORY].
5
"
" and the preset channel number flash.
While "
" and the preset channel number are
6
flashing:
+
Press [–/g] or [f/
Press [MEMORY].
7
If the "
" indicator goes off during programming, return to
3
step
.
Repeat steps 3 to 7 to program other stations.
RX-D11 only
When using the remote control
Preparation: Set [
] to "TUNER".
1. Press [BAND] to select "FM" or "AM".
2. Press [MEMORY/PGM].
3. While "
" and the frequency are flashing:
Press [–/g] or [f/+] to select the desired station.
4. Press [MEMORY/PGM].
5. While "
" and the preset channel number are flashing:
Press [3] or [4] to select the preset channel.
6. Press [MEMORY/PGM].
Repeat steps 2 to 6 to program other stations.
AM
+
] to select the desired
] to select the preset channel.
7
RQT5210