Panasonic RXDS28 - RADIO CASSETTE W/CD 사용 설명서 - 페이지 8
{카테고리_이름} Panasonic RXDS28 - RADIO CASSETTE W/CD에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic RXDS28 - RADIO CASSETTE W/CD 20 페이지. Portable stereo cd system
Panasonic RXDS28 - RADIO CASSETTE W/CD에 대해서도 마찬가지입니다: 사용 설명서 (21 페이지), 사용 설명서 (20 페이지), 사용 설명서 (20 페이지), 사용 설명서 (20 페이지)
페이지 인쇄
Listening
operations
De
Presetting radio broadcasts
o Up to ten FM and AM stations each can be programmed.
© If broadcast frequencies are preset in the memory, you can easily
tune in any of these frequencies.
è You can preset just those stations you like.
Press BAND to select "FM" or "AM".
Every time you press the button: FM «> AM
Press MEMORY.
i
" and the frequency flash.
While "
" and the frequency are flashing:
Press -A4 or +>
to select the desired station.
"EEE" lights when an FM stereo program is being received.
Reference
You can select the desired broadcast by using "Automatic
tuning". (See page 9.)
Press MEMORY.
m
" and the preset channel number flash.
While "
" and the preset channel number are
flashing:
Press -A-4 or +P
to select the preset channel.
Press MEMORY.
If the "
" indicator goes off during programming, return
to step 2.
Repeat steps 2 to 6 to program other stations.
MEMORY
To erase an unwanted preset channel
e.g. erasing preset channel 3.
. Select preset channel 3 (see page 9).
iS
baie eedlelana Rinse bi A
Ne oak bate loa
et De
ete
. Press MEMORY twice ("Qary" and the preset channe! number
flash).
. While "Gey" and the preset channel number are flashing:
Press -A444 or +/ 1
repeatedly until the preset channel
display indicates "- —".
. Press MEMORY.
The erased preset channel will now be skipped when selecting preset
channels. (e.g. 1>2—4-5....)
borp
nnspasvonnsnsnaasngganbhbvprnusranususasasaasnsasaborbhtpvoan
MEMORY
FM allocation setting
By adjusting the allocation, you can enable this tuner to receive FM
broadcasts allocated in 0.1 MHz steps.
1. Press and hold BAND for approximately 5 seconds during AM
display. The frequency display will be returned to the minimum
frequency of the FM band and the display will begin to flash. Keep
holding for approximately 5 more seconds.
When the display stops flashing and indicates a different frequency
number, release BAND.
N
To return to the original frequency, repeat steps 1 and 2 above.
Note!
After changing the "allocation" setting, the frequencies you previously
preset in the memory will be cleared.