Panasonic SA-AK580 사용 설명서 - 페이지 11

{카테고리_이름} Panasonic SA-AK580에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic SA-AK580 20 페이지. Cd stereo system
Panasonic SA-AK580에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄
Panasonic SA-AK580 사용 설명서

Using the FM/AM radio

Manual tuning
Manual tuning
1
Press [FM/AM] to select "FM" or "AM".
2
Press [TUNE MODE] to select "MANUAL".
3
Press [4 / 1] or [¡ / ¢] to select the frequency of the
required station.
"
" is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press and hold [4 / 1] or [¡ / ¢] until the frequency starts
changing rapidly. The unit begins auto tuning, stopping when it
fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [4 / 1] or [¡ / ¢] once again.
To improve the sound quality
When "FM" is selected
Press and hold [TUNE MODE] to display "MONO".
To cancel
Press and hold [TUNE MODE] again until "MONO" disappears.
• MONO is also cancelled if the frequency is changed.
• Turn off "MONO" for normal listening.
When "AM" is selected
Press and hold [TUNE MODE].
Each time you press button: BP2
RQTX0271-B_GB.indd 11
RQTX0271-B_GB.indd 11
BP1
Memory preset
Memory preset
30 FM and 15 AM stations can be preset.
Preparation
Press [FM/AM] to select "FM" or "AM".
Automatic presetting
1
Press [OK] repeatedly to select either "CURRENT" or
"LOWEST".
CURRENT
Tuning begins from the current frequency.
LOWEST
Tuning begins from the lowest frequency.
2
Press and hold [PROGRAM] to start presetting.
The tuner presets all the stations it can receive into the channels
in ascending order. When fi nished, the fi rst station memorised is
tuned in.
Manual presetting
1
Press [TUNE MODE] to select "MANUAL".
2
Press [4 / 1] or [¡ / ¢] to tune to the required station.
3
Press [PROGRAM].
4
Press the numeric buttons to select a channel.
The station occupying a channel is erased if another station is
preset to that channel.
5
Repeat steps 2 to 4 to preset more stations.
Selecting a preset station
Press the numeric buttons to select the channel.
For channels 10 to 30 press [h10], then the two digits.
OR
1
Press [TUNE MODE] to select "PRESET".
2
Press [4 / 1] or [¡ / ¢] to select the channel.
11
5/6/09 11:00:01 AM
5/6/09 11:00:01 AM