Panasonic SA-AK750 사용 설명서 - 페이지 11

{카테고리_이름} Panasonic SA-AK750에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic SA-AK750 28 페이지. Panasonic sc-ak750 stereo systems: operating instruction
Panasonic SA-AK750에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄
Panasonic SA-AK750 사용 설명서

FM/AM radio

TUNER /
Manual tuning
Manual tuning
BAND
1
Press [TUNER/BAND] to select "FM" or "AM".
2
Press [PLAY MODE] to select "MANUAL".
3
Press [4, REW/ ] or [¢,
frequency of the required station.
"
" is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press and hold [4, REW/ ] or [¢,
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [4, REW/ ] or
[¢,
/ FF ] once again.
To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO"
disappears.
• MONO is also canceled if the frequency is changed.
• Turn off "MONO" for normal listening.
TUNER
FM allocation setting
FM/AM/XM
By main unit only
This system can also receive FM broadcasts allocated in
0.1 MHz steps.
To change the step to 0.1 MHz
Press and hold [TUNER, FM/AM/XM] when "FM" is
1
selected.
After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
2
Continue to hold down [TUNER, FM/AM/XM].
• When the minimum frequency changes, release
the button. To return to the original step, repeat the
above steps.
• After changing the setting, previously preset
frequency will be cleared.
20 FM and 15 AM stations can be preset.
Preparation
Press [TUNER/BAND] to select "FM" or "AM".
/ FF] to select the
1
/ FF] until the
2
The tuner presets all the stations it can receive into the
channels in ascending order. When fi nished, the last station
memorized is tuned in.
1
2
3
4
Press the numeric buttons to select the channel.
OR
1
2
TUNER /
Memory preset
Memory preset
BAND
Automatic presetting
Tune to the frequency where presetting is to begin.
Press and hold [PROGRAM] to start presetting.
Manual presetting
Press [PLAY MODE] to select "MANUAL".
Press [4, REW/ ] or [¢,
required station.
Press [PROGRAM].
Press the numeric buttons to select a channel.
For channels 10 to 20 press [h10], then the two digits.
The station occupying a channel is erased if another
station is preset to that channel.
Selecting a preset station
Press [PLAY MODE] to select "PRESET".
Press [4, REW/ ] or [¢,
channel.
/ FF ] to tune to the
/ FF ] to select the
11
RQT8043