Panasonic SA-HC7 사용 설명서 - 페이지 3
{카테고리_이름} Panasonic SA-HC7에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic SA-HC7 32 페이지. Compact stereo system model no. sc-hc7
페이지 인쇄Connection
1
75 Ω
FM
ANT
R
L
LOOP
AM
ANT
EXT
SPEAKERS (SB-HC7)
2
3
4
Compact stereo system
Main unit
Speakers
About speakers
■
●
These speakers do not have magnetic shielding. Do
not place them near televisions, personal computers or
other devices easily influenced by magnetism.
Use only the supplied speakers. Do not use speakers
●
from other equipment.
●
The shape of right and left speakers is the same. You
can place them in either side.
●
Speaker nets can be removed.
Note
●
Do not use this unit continuously with a high volume.
The speaker characteristics may deteriorate or the speaker
life-span may be extremely shortened.
Turn down the volume in the following cases even in the
●
normal use. (Failure to do so may cause the speakers to be
damaged.)
• When the sound is distorted
• When you adjust the sound quality
Insertion of connector
Even when the connector is perfectly inserted, depending
on the type of inlet used, the front part of the connector
may jut out as shown in the drawing.
However there is no problem using the unit.
Appliance inlet
Approx. 6 mm
6 Ω
To household mains
socket
SC-HC7
SA-HC7
SB-HC7
Connector
1
Connecting FM indoor antenna
Receive broadcast signals
(➡
fix the end of the antenna using a tape at the least noisy
position.
●
Keep the antenna as far away as possible from the AC
mains lead and speaker cords.
2
Connecting AM loop antenna
Receive broadcast signals
(➡
place the antenna at the least noisy position.
1
Stand the antenna up on
3
its base.
2
Use a Phillips-head
screwdriver, etc.
Black
Red
White
●
Use a screwdriver of 15 cm or longer. Do not screw too
tightly. Otherwise, the screwdriver goes around in circle and
cannot be fi xed.
3
Connecting speakers
■
Connecting speakers and speaker cords
Connect cords in the way that tag colours match the terminal
colours.
1. Put the cord on the hooks.
2. Pull out the cord from the chase.
●
Do not allow the speakers to step on the cords for connection.
Bottom face of the speaker
chase
hook
Note
●
Improper connection may cause the unit to malfunction.
●
Do not short-circuit speaker cords. Doing so may damage
circuits.
●
After connecting speakers, remove the protection film from
it's top plate.
4
Connecting the AC mains lead
●
Connect the AC mains lead after all other connections are
complete.
READ THE CAUTION FOR THE AC MAINS LEAD
ON PAGE 2 BEFORE CONNECTION.
Note
●
Once the AC mains lead is connected, the unit may not be turned
on immediately even if you press the power button. Wait approx.
10 seconds to turn the unit on.
page 12) after connection and
page 12) after connection and
Click!
White
Blue
●
Do not insert the vinyl parts.
3