Panasonic SA-PM42 사용 설명서 - 페이지 11
{카테고리_이름} Panasonic SA-PM42에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic SA-PM42 20 페이지. Cd stereo system
Panasonic SA-PM42에 대해서도 마찬가지입니다: 사용 설명서 (48 페이지)
페이지 인쇄
Using the timer
Setting the clock
This is a 24-hour clock.
1 Press [CLOCK/TIMER] to select "CLOCK".
Each time you press the button:
CLOCK
Original display
2 Within 5 seconds, press [u/t] or [y/i] to
set the time.
3 Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for a few
seconds.
Note
The clock may lose or gain minutes over a period of
time. Readjust as necessary.
Using the play timer
You can set the timer to come on at a certain time to
wake you up.
Preparation
•
Turn the unit on and set the clock.
•
Prepare the music source (disc, radio, USB or iPod
source) and set the volume.
1 Press [CLOCK/TIMER] repeatedly to select play
timer.
CLOCK
Original display
2 Within 5 seconds, press [u/t] or [y/i] to
set the starting time.
Start time
Play timer indicator
3 Press [CLOCK/TIMER] to confirm.
4 Repeat steps 2 and 3 to set the finishing time.
Finish time
zPLAY
zPLAY
To activate the timer
5 Press [z, PLAY] to turn on play timer.
zPLAY
6 Press [^] to turn off the unit.
To
change the
settings
change the
source or
volume
check the
settings (when
the unit is on
or in standby
mode)
cancel
Note
PLAY
•
The play timer will start at the preset time, with the
volume increasing gradually to the preset level.
•
The timer comes on at the set time every day if the
timer is on.
•
The unit must be in the standby mode for the timer to
function.
•
If you turn the unit off and on again while a timer is
functioning, the finish time setting will not be activated.
Using the sleep timer
This function enables you to turn off the unit
automatically after the set time.
Press [SLEEP] repeatedly to select your desired
time.
Sleep timer indicator
To cancel
Press [SLEEP] to select "OFF".
Changing the remaining time
Press [SLEEP] to show the remaining time, and press
[SLEEP] again to select your desired time.
Note
The play and sleep timer can be used together. The
sleep timer always has priority. Be sure not to overlap
timer settings.
No display (off)
Action
Repeat steps 1 to 4 and 6.
1)
Press [z, PLAY] to clear the timer
indicator from the display.
2)
Make changes to the source or
volume.
3)
Perform steps 5 and 6.
Press [CLOCK/TIMER] repeatedly to
select zPLAY.
Press [z, PLAY] to clear the timer
indicators from the display.
11