Panasonic SA-PM42 사용 설명서 - 페이지 4
{카테고리_이름} Panasonic SA-PM42에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic SA-PM42 48 페이지. Cd stereo system
Panasonic SA-PM42에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)
페이지 인쇄
Simple setup
Making the connections
Connect the AC power supply cord only after all the other connections have been made.
Connect the speaker cables.
Connect the AM loop antenna.
AM loop antenna
Stand the antenna up on its base. Keep the loose antenna
cord away from other wires and cords.
FM outdoor antenna
FM outdoor antenna (not included)
•
Never use an outdoor antenna during a lightning storm.
•
You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.
•
Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
•
Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m (16 to 40 feet) of vinyl-covered wire horizontally along a
window or other convenient location.
4 4
SC-PM42PP,PC.indb 4
Insert
fully
Connect the AC power supply cord.
The included AC power supply cord is for use with this unit only. Do not
use it with other equipment.
Do not use an AC power supply cord from other equipment.
Conserving power
The unit consumes approx. 0.35 W even when it is turned off with
[8, POWER]. To save power when the unit is not to be used for a long
time, unplug it from the household AC outlet. Remember to reset the
radio stations and any other memory items before using the unit again.
75 Ω coaxial cable
(not included)
Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position with the
least amount of interference.
AM outdoor antenna
Adhesive tape
FM indoor antenna
To household
AC outlet
2/5/2010 10:55:16 PM