Panasonic SA-PT450 사용 설명서 - 페이지 26

{카테고리_이름} Panasonic SA-PT450에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic SA-PT450 48 페이지. Dvd home theater sound system

페이지 인쇄

Changing the player settings (continued)

QUICK SETUP enables successive settings of the items in the shaded area.

Player settings (continued)

7 "Video" tab

TV Aspect

Choose the setting to suit your

television and preference.

TV Type

Select to suit the type of

television.

Time Delay

When connected with a Plasma

display, adjust if you notice the

audio is out of sync with the

video.

Video Out (AV/Component)

Choose the video signal format

to be output from the SCART

(AV) and Component terminal.

Still Mode

Specify the type of picture

shown when paused.

NTSC Disc Output

Choose PAL 60 or NTSC output

when playing NTSC discs

(\ page 13, Video systems).

7 "Audio" tab

Dolby Digital

DTS Digital Surround

MPEG

Dynamic Range

Compression

Speaker Settings

(\ page 28)

Set the delay time for your

center and surround speakers

RQT8043

• 4:3 Pan&Scan : Regular aspect television (4:3)

The sides of the widescreen picture are cut off so it ﬁ lls the

screen (unless prohibited by the disc).

• 4:3 Letterbox: Regular aspect television (4:3)

Widescreen picture is shown in the letterbox style.

• 16:9: Widescreen television (16:9)

• Standard (Direct View TV)

• Projection TV

• 0ms

• Video/YPbPr

• RGB/No Output

• Automatic

• Field: The picture is not blurred, but picture quality is lower.

• Frame: Overall quality is high, but the picture may appear blurred.

• PAL60 : When connected to a PAL television.

• NTSC: When connected to an NTSC television.

• Bitstream

• PCM

• Bitstream

• PCM

• Bitstream

• Off

• On: Adjust for clarity even when the volume is low by compressing

the range of the lowest sound level and the highest sound level.

Convenient for late night viewing.

(Only works with Dolby Digital)

• Center:

• Surround (L/R): 0.0 /5.0/10.0/15.0 ms

• CRT Projector

• Plasma TV

• 20ms

• 40ms

• 60ms

• S-Video/YPbPr

Select to suit the type of equipment you connected to the

HDMI AV OUT terminal (\ page 9).

Select "Bitstream" when the equipment can decode the

bitstream (digital form of multi-channel data). Otherwise,

select "PCM".

(If the bitstream is output to the equipment without a de-

coder, high levels of noise can be output and may damage

your speakers and hearing.)

0.0 /1.0/2.0/3.0/4.0/5.0 ms

• LCD TV/Projector

• 80ms

• 100ms