Panasonic SCAK12 - CD STEREO SYSTEM 사용 설명서 - 페이지 12
{카테고리_이름} Panasonic SCAK12 - CD STEREO SYSTEM에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic SCAK12 - CD STEREO SYSTEM 32 페이지. Cd stereo system
Panasonic SCAK12 - CD STEREO SYSTEM에 대해서도 마찬가지입니다: 사용 설명서 (33 페이지), 사용 설명서 (32 페이지), 사용 설명서 (32 페이지)
페이지 인쇄
1
2
1
2
3
SC-AK44
SC-AK33
4
A
12
RQT5621
SC-AK22
SC-AK12
Listening to radio broadcasts
Press [TUNER, BAND] to select band.
The unit comes on automatically.
Every time you press the button:
FM ↔ AM
Press [L L L L L , TUNE MODE] to select "MANUAL".
Every time you press the button:
4
MANUAL ↔ PRESET.
Press [TUNE/TIME ADJ (3) or (4)] to select the
3
frequency of the required station.
"TUNED" is displayed when a radio station is tuned.
"STEREO" ("ST" for SC-AK33, SC-AK22 and SC-AK12) is dis-
played when a stereo FM broadcast is being received.
Adjust the volume.
MHz
Auto tuning
Press and hold [TUNE/TIME ADJ (3) or (4)] for a moment until the
frequency starts changing rapidly. The unit begins auto tuning,
stopping when it finds a station.
•
Auto tuning may not function when there is excessive interference.
•
To cancel auto tuning, press [TUNE/TIME ADJ (3) or (4)] once
again.
If noise is excessive in FM
A
Press [
g/(
This mode improves sound quality if reception is weak, but
broadcasts will be heard in monaural.
Press [ g/( FM MODE/BP] again to cancel the mode.
"MONO" goes out. MONO is also canceled if the frequency is
changed.
Turn off "MONO" for normal listening. Stereo and monaural
MHz
broadcasts are automatically played as they are received.
TUNED
STEREO
FM allocation setting
By adjusting the allocation, you can enable this tuner to receive FM
broadcasts allocated in 0.1 MHz steps.
Press and hold [TUNER, BAND]. After a few seconds, the display will
change to a flashing display of the current minimum FM frequency.
If you continue to hold the button down, the minimum frequency will
change. Release the button at this time.
MHz
TUNED
ST
To return to the original frequency indication, repeat above.
Note
•
After changing the "allocation" setting, the frequencies you previously
preset in the memory will be cleared.
•
Sound is momentarily interrupted if you load/unload tapes while
listening to an AM broadcast.
MHz
MONO
FM MODE/BP] to display "MONO".