Diasonic RIR-900 수동 시작 - 페이지 4

{카테고리_이름} Diasonic RIR-900에 대한 수동 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Diasonic RIR-900 5 페이지.

RECODE

Precautions before recording

These should be checked and followed before starting Radio Record (FM/AM record),

MIC Record (INT/EXT MIC record), record from AUDIO device (LINE-IN), and Record

reservations.

-Select memory to store in recording.

-Check the bit-rate. --- Setup in Main menu

*In general, it is recommended to record by initial bit-rate (Default), taking memory

capacity into consideration.

-Check the battery capacity.

*The capacity of battery is displayed in upper right on screen.

-Check the remaining memory

Display for selecting record memory

Internal (On-board) memory will be used if there is no external memory.

But, if there is external Memory,

select memory by pressing A-B/REPEAT key

Manual Record

-- Files recorded using the RIR-900 will be encoded as MP3 files.

To record Radio (FM/AM RECORD)

① Select the FM/AM broadcasting station you want to record.

② Press the Record button as shown in the diagram on the right to start recording.

When recording:

--- Upper right Record LED is ON (RED).

--- The screen display should change as shown when recording is in progress.

--- A file for the recording is created automatically.

--- The recorded file from FM radio is saved to the FM folder, and AM radio to the AM

folder.

*You can select the FM/AM folder by choosing NORMAL STYLE from PLAY Style.

* It is recommended that recording is carried out in an area with good reception

because when recording conditions are not good you may get noise/interference.