Panasonic SCPM19 - MINI HES W/CD PLAYER 사용 설명서 - 페이지 20
{카테고리_이름} Panasonic SCPM19 - MINI HES W/CD PLAYER에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic SCPM19 - MINI HES W/CD PLAYER 28 페이지. Panasonic stereo system user manual
Panasonic SCPM19 - MINI HES W/CD PLAYER에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지)
페이지 인쇄
4
4
/REW/
,
¢
3
/FF/
7
STOP
,
–DEMO
OPEN 0
1
2
3
TAPE
3
VOLUME
DOWN
20
RQT7364
Top of the unit
OPEN
1
3
2
Insert inside the
guides
Forward side
UP
Cassette tapes
1
Press [OPEN 0] to insert a cassette.
Close the lid by hand.
2
Press [TAPE 3] to start playback.
Repeat step 1 and 2 to play the other side of the tape.
3
Adjust the volume.
To
Action
Press [STOP 7, – DEMO].
stop tape playback
Press [TAPE 3] when the system is
start one touch play
OFF with the cassette loaded.
fast-forward and
Press [4 4 4 4 4 /REW/4] or [3 3 3 3 3 /FF/¢] in
rewind
the stop mode.
Cassette tape selection and care
Types of cassettes which can be played correctly
Only normal position tapes are recommended.
NORMAL POSITION/TYPE I
HIGH POSITION/TYPE II
METAL POSITION/TYPE IV
• Tapes exceeding 100 minutes are thin and can break or get
caught in the mechanism.
• Tape slack can get caught up in the mechanism and should
be wound up before the tape is played.
• Endless tapes can get caught up in the deck's moving parts
if used incorrectly.
To find the beginning of a program
(TPS: Tape Program Sensor)
TPS finds the beginning of a track and resumes play from there.
Each press increases the number of tracks skipped, up to a
maximum of 9.
Press [4 4 4 4 4 /REW/4] or [3 3 3 3 3 /FF/¢] during play.
Note
The TPS function searches for silent parts of about 4 seconds
in length which are normally found between tunes. As a result,
it may not function properly in the following cases:
• With short silent parts
• When noise occurs between tunes
• With silent parts found within tunes
✕
✕