Diatip CD 600 Economy 운영자 매뉴얼 - 페이지 5
{카테고리_이름} Diatip CD 600 Economy에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diatip CD 600 Economy 13 페이지. Retipping system
페이지 인쇄
Midhage Diatip AB
4
Guide Pin
5
6
The matrix A1 has three different radii.
Choose which radius is suitable for the
core bit. (Position "D" is only for the 16
mm or 20 mm matrix):
Ø 55-90 mm
Ø 90-200 mm
Ø > 225 mm
Ø > 35 mm
See also the red plate on the tool set
The matrix A2 and A3 are for radii >/= 35
mm resp. >/= 45 mm
To change position of the matrix loosen
the handle which locks the matrix and
lower enough for the guide pin on the
bottom of the head to come free
VERY IMPORTANT
Be sure that the guide pin on the bottom
of the cutter head fits into the hole on top
of the matrix for the new position
Tighten the handle clockwise. After the
matrix is secured in position carefully
check that the cutting knife moves freely
into the matrix.
May 2003
A
B
C
D
5