Axis 2191 설치 매뉴얼 - 페이지 5

{카테고리_이름} Axis 2191에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis 2191 9 페이지. Axis communications network camera
Axis 2191에 대해서도 마찬가지입니다: 설치 매뉴얼 (7 페이지), (일본어) 사양 (2 페이지)

페이지 인쇄

AXIS 2191 Installation Guide

Configuring the Audio Module

The network camera's administration pages provide all the tools required for successfully configuring

the AXIS 2191. From the camera's home page, click on the link to Administration Tools. A new page

containing the tools will open. To complete the configuration of your audio module, follow these

instructions:

Admin

tools

This selection will depend on your application. See page 5 for more information.

Enter the number of clients that will be able

to access the application at any one time.

Use this setting to limit access if you only

have limited bandwidth available.

If you are using Half-Duplex mode, the

Send option can be used to send audio from

the client currently transmitting to all the

other clients, and not just to the server end.

Set to Yes to enable the function.

When using Half-Duplex mode, the Push-

To-Talk button will be visible. Select the

mode to use for this button. Selecting

Toggle means that when the button is

pushed it will remain so until pushed a

second time. Instant means that the button

will remain active (pushed) until released.

Adjust the Volume Out control until a

satisfactory speaker level is heard. The

Level Out LED can be used to check that

there is audio being received. Note that

both the control and the LED are on the

audio module itself.

From the Admin tools, click External Devices. Select the

AXIS 2191 Audio Module as the device to use. Click Save.

Note: If you do not see External Devices, then your camera

does not have the correct firmware installed and it must be

upgraded.

Under External Devices, click Audio. This opens the

configuration page for the audio module (see illustration

below).

Select the audio mode. This can be:

• Full-Duplex (Talk and Listen simultaneously)

• Half-Duplex (Talk and Listen)

• Simplex - Talk

• Simplex - Listen

The configuration page for the AXIS 2191.

Page 4 of 7