diBar 2D Series 빠른 시작 매뉴얼

{카테고리_이름} diBar 2D Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. diBar 2D Series 6 페이지.

페이지 인쇄

Please this manual thoroughly prior to ensure full use of the product's functionality and

sore safety in a convenient location for quick reference even after reading.

WARNING

CAUTION

Be sure to observe all these safety precautions.

WARNING



Never disassemble or modify the device; doing so could result in an accident and such as fire or malfunction.



Never put the device into a microwave oven or high pressure container.



If smoke, abnormal odors or noises come from the device, immediately unplug the power from the device.

Failure to do so could cause fire or electrical shock.



Never use the device on the line voltage other than the specified level. Doing so could cause the device

to break or burn.



Do not scratch, modify, bend, twist, pull or heat the AC adapter cable. Do not place heavy material on

the cable or allow the cable to get pressed under heavy material. Doing so could break cable, resulting

in a fire.



If the power cord of the AC adapter is damaged, stop using it and contact your nearest dealer. Failure

to do so could result in a fire or electric shock.



Do not plug in or unplug the power cord with wet hands.



If the device shows signs of abnormality, immediately unplug the AC adapter or interface cable from the

device.



If foreign material or water gets into the device, immediately unplug the AC adapter or interface cable

from the device. Failure to do so could result in a fire or electric shock.



If you drop the device so as to damage its housing, immediately unplug the AC adapter or interface cable

from the device. Failure to do so could result in a fire or electric shock.



Use the recommended AC adapter only. Failure to do so could result in a fire.

For rechargeable battery, charger, and charging process



Never use a rechargeable battery other than that specified in the device user guide.

Never charge a dry cell battery or a recharge battery other than that specified in the device user guide.

Doing so could cause heat generation, breakage, or fluid leakage.



Do not touch directly charge terminals and battery with wet hands.

CAUTION



Never put the device in places where there are exclusively high temperatures such as inside closed-up

automobiles or in places exposed to direct sunlight. Doing so could affect the housing or parts, resulting

in a fire.



Avoid using the device in extremely humid or dusty areas or where there are drastic temperature changes.

Moisture or dust will get into the device, resulting in malfunction, fire or electric shock.



Never cover or wrap up the device or AC adapter in a cloth or blanket. Doing so could cause the device

to heat up inside, deforming its housing, resulting in a fire.

Always use the device and AC adapter in a well-ventilated area.



Do not place the device anyplace where it may be subjected to oily smoke or steam, e.g., near a cooking

range or humidifier. Doing so could cause result in a fire or electric shock.



Keep the power cord away from any heating equipment. Failure to do so could melt the sheathing, result

in a fire or electric shock.



Do not insert or drop foreign materials such as metals or anything inflammable through the openings or

vents into the device. Doing so could cause result in a fire or electric shock.



For safety reason, unplug the AC adapter and disconnect interface cable when not using for long periods

of time.

Regulations

The device complies with FCC Class B, CE Class B and RoHS.

Due to continued product development this information may change without notice.

All brand, product and service, and trademark names are the property of their registered

owners.

SAFETY PRECAUTIONS

Meaning of symbols

Alters you to those conditions which could cause serious bodily

injury or death if the instructions are not followed correctly.

Alters you to those conditions which could cause minor bodily injury

or substantial property damage if the instructions are not followed

correctly.

diBar™ 2D Series Quick start guide