Easypix Aquapix W1400 매뉴얼
{카테고리_이름} Easypix Aquapix W1400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Easypix Aquapix W1400 3 페이지.
페이지 인쇄
IMPORTANT
- Don't open the battery door under water.
- Close the battery door properly for best water sealing.
- Rinse the camera with clean water after used and keep it dry for
storage.
1. Getting to know your camera
14.0 Mega pixels resolution sensor
Digital still camera
Digital video camcorder
Built-in flash light
4x digital zoom
2.7+1.8 " TFT color display
MicroSD card support
2 x AAA alkaline batteries
2. Functional parts
Press this button to take photographs or to start /stop recording
1
Shutter
a video clip, or to confirm changes in menu mode
Press this button for at least 2 seconds to switch on or off the
Power on/off
2
button
camera，or press it to display or hide the status icon on LCD.
Monitor switching
Press this button to switch between the front monitor and the back
3
button
monitor.
4
Front monitor
Use the front monitor when taking self-portrait shots
Use the built-in flash to give the subject extra lighting when
5
Flash light
shooting in the dark (the best shooting distance is within 1.5m).
Capture the image.
6
Lens
Note: Keep the lens clean. Dirt and fingerprints will affect the
quality of the picture.
7
Busy indicator
When the indicator is blinking, the camera is busy.
Macro mode: Select this mode to take close-up photographs
Macro/normal
(distance 11cm - 18cm).
8
switch
Normal mode: Select this mode to take photographs from
0.5m - infinity.
9
Main screen
Display photographs, video clips, camera setting and menu.
In Preview mode: press this button for zooming in.
In Menu mode: press this button to move up the selection bar.
10
Up/Tele
In Image Playback mode: press this button for enlarging the photo.
In Video Playback mode: press it to start/pause the video.
In Shooting mode: press this button for zooming out.
In Menu mode: press this button to move down the selection bar.
11
Down/Wide
In Image Playback mode: press this button for reducing the photo size.
In Video Playback mode: press this button to enter the thumbnail mode
In Menu mode: press this button for the left selection;
In Playback mode: press this button to go back to the previous one;
In Photo Infinite Preview mode: press this button to switch to Flash
12
Left / Flash light
mode;
When zooming in under Image Playback mode: press it to move to the
left portion of the photo.
In Video Playback mode: press it for fast rewind.
Press this button to enter Playback mode;
In Playback mode: press this button to move to the next one;
In Menu mode: press this button for the right selection;
13
Right / Playback
When zooming in under Image Playback mode: press it to move to the
right portion of the photo.
In Video Playback mode: press it for fast forward.
Press this button to switch between movie and still capture mode;
In Playback mode: press this button to exit.
14
Mode switch
When zooming in under Image Playback mode: press it to move to
the upper portion of the photo. In Video Playback mode: press it to
stop the video.
In Preview mode: press it to enter the settings Menu.
In Playback mode:
Press it for a short time to enter"Delete single/ all files"mode;
15
Menu / Delete
Press it for a long time to enter file compiling and system setting
menu.
In Photo (zoom in) Playback mode: press it to move to the down
area of the photo.
16
Tripod connector
For fixing the camera on the tripod.
You can download photographs and video clips to a computer
17
USB interface
when connecting with a USB cable. (not included)
18
MicroSD card slot
MicroSD card storage location.
Battery
19
Compartment for 2 x AAA alkaline batteries
compartment
20
Strap hook
Hook for attaching the wrist strap to the camera.
3. Explanation of the status icons
Item
Function
Description
Shows the current operating mode:
Photo mode.
1
Mode
Video mode.
Force flash: The flash will be on under any
environment.
2
Flash
Auto flash: The camera determines if the flash
should be used or not.
No flash: The flash is turned off.
Normal/Macro
Mode (0.5m – infinity).
3
mode
Macro mode (11cm – 18cm).
4
Self-timer
Indicates the Self-timer is set
Shows the selected picture resolution:
20 M = 5184X3888;14M = 4320x3240;
5
Resolution
8M = 3264x2448; 5M = 2592x1944;
3M = 2048x1536; VGA = 640x480
Super fine.
6
Picture quality
Fine.
Normal
The batteries are full.
7
Battery indicator
The batteries are empty.
8
Zoom indicator
Shows the zoom ratio during preview mode
Indicates the MicroSD card is inserted and will be
9
MicroSD card
used as storage for PHOTO and VIDEO
10
White balance
Shows the selected White-balance mode.
Photo mode: No. of pictures that can be taken.
11
Photo/Video counter
Video mode: Available recording time.
4. Details for camera settings
20 MP resolution
14 MP resolution
8 MP resolution
Resolution
5 MP resolution
3 MP resolution
VGA resolution
Quality
Super Fine/Fine/Normal
Metering
Center/Multi/Spot
Auto
Daylight
Cloudy
White Balance
Tungsten
Fluorescent
ISO Speed
Auto/100/200/400/800
±2.0, ±5/3, ±4/3, ±1.0, ±
Exposure
2/3, ±1/3, 0
Self Timer
On/Off
Sharpness
Hard/ Normal/ Soft
Normal/ B&W/ Sepia/ Negative/
Effect
Lomo/
Pencil
Sketch/
Green/ Blue/ Vivid
Date Stamp
On/ Off
Quick View
On/ Off
VGA 640 x 480
Movie Size
QVGA 320 x 240
Auto
Daylight
Cloudy
White Balance
Tungsten
Fluorescent
Sounds
Off/On
Frequency
50Hz / 60Hz
Power Save
Off / 1Minute / 3 Minutes
English/ French/
Language
Deutsch/Italian/Spanish/
Portuguese/Japanese
Date/Time
YY/MM/DD/HH/MM/SS
Format
Yes/No
Reset All
Yes/No
Version
Shows the firmware version
Note: Turning off the camera will not erase the last settings.
5. Using the camera
5.1 Installing the batteries
1. Open the battery door.
2. Insert 2 x AAA alkaline batteries into the camera compartment.
3. Close the battery door.
Note:
Make sure that the batteries are inserted in the right directions (as marked in the diagram above).
5184x3888
4320x3240
3264x2448
2592x1944
2048x1536
640x480
Picture quality setting
Metering setting
Automatic white balance
White balance for shooting
under fine weather condition
White balance for shooting
under cloudy condition
White balance for shooting
under tungsten lighting
White balance for shooting
under fluorescent lighting
Sensitivity selection
Exposure setting
Self timer setting
Sharpness setting
Red/
Effect setting
Date stamp setting
Quick view setting
Video resolution setting
Automatic white balance
White balance for shooting
under fine weather condition
White balance for shooting
under cloudy condition
White balance for shooting
under tungsten lighting
White balance selected for
shooting under fluorescent
lighting
Sounds setting
Select power frequency in
your location
Auto power off selection
Display language selection
Date or time setting
Format the MicroSD Card
Reset all settings to factory
default positions