Axis Axis 211 빠른 설치 매뉴얼 - 페이지 4
{카테고리_이름} Axis Axis 211에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis Axis 211 8 페이지. For somat edaq; somat edaq lite; axis m7001 video encoder; korenix jetnet poe switch
Axis Axis 211에 대해서도 마찬가지입니다: 사양 (6 페이지), 브로셔 및 사양 (4 페이지), 브로셔 (2 페이지), 사양 (2 페이지), 빠른 시작 매뉴얼 (16 페이지)
페이지 인쇄
One-click Installation
The AXIS Internet Dynamic DNS Service
•
The One-click installation procedure uses the AXIS Internet Dynamic DNS Service. This free service allows you to quickly
and simply install your camera, which then recieves a static name (DNS name) and a dynamic IP address. More
information about the AXIS Internet Dynamic DNS Service is available at www.axiscam.net
•
Please note that this procedure will send the AXIS 210/211's IP address, firmware version, product type and serial number
to the Axis Internet Dynamic DNS Service. No personal information is transferred.
•
To remove the DNS name and unregister from the Axis Internet Dynamic DNS Service, open the Setup pages in the AXIS
210/211, click System Options > Network > TCP/IP, click the Settings button for the AXIS Internet Dynamic DNS Service
and finally, click the Remove button.
Follow these instructions:
1. Once the network and power cables have been connected (see page 4), wait for the Status
indicator to show a steady green.
2. Now press the Control button on the underside of the camera once. The Status indicator
on
the front of the camera will blink green while it connects to the AXIS Internet Dynamic
DNS Service.
3. Wait for the Status indicator to go back to showing a steady green.
4. To complete the installation, now visit www.axiscam.net from an Internet connected PC.
This must be done within 60 minutes of pressing the Control button.
5. Follow the on-screen instructions provided by the AXIS Internet Dynamic DNS Service.
You will need your product's serial number to complete the installation.
The serial number (S/N) is on the label on the
underside of the AXIS 210/211. See page 3.
6.
Please see page 7 for instructions on how to set the password.
Note:
If this installation was unsuccessful, try one of the other methods described on the following pages.