HTC 10 지침

{카테고리_이름} HTC 10에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. HTC 10 2 페이지.
HTC 10에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (6 페이지), 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (3 페이지)

HTC 10™

___

Inserting your nano SIM and microSD cards

IMPORTANT:

Use a standard nano SIM only.

Don't cut a micro SIM or regular SIM card and insert it into the

nano SIM slot. It's thicker than the standard nano SIM card and

may get stuck in the slot.

Don't disassemble any part of the phone.

Don't try to open the phone or remove the battery by force. This

may damage the phone or its electronics and will invalidate the

warranty.

Don't throw the provided trays away.

You need them to insert your nano SIM and microSD cards.

gold contacts

nano SIM

cut-off corner

1. With the phone facing

down, insert the tip of the

tray eject tool that came

with your phone (or a small

bent paperclip) into the

nano SIM tray eject hole

that's on the left side of your

phone.

Push the tip all the way into

the hole until the nano SIM

tray ejects, and then pull the

tray out.

2. Place your nano SIM card

into the tray, with the gold

contacts facing up and cut-

off corner facing out.

Insert the tray back into the

slot. When reinserting the

tray, make sure it is facing

up so that the nano SIM

card doesn't fall out. Slide

the tray all the way into

the slot.