EasyPro BFL12 작동, 안전, 보증에 대한 지침

{카테고리_이름} EasyPro BFL12에 대한 작동, 안전, 보증에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. EasyPro BFL12 2 페이지. Submersible, warm white, low voltage underwater led light

페이지 인쇄

Submersible, Warm White, Low Voltage • BFL9, BFL12, BFL18

Underwater LED Light

Instructions for Operation • Safety • Warranty

Thank you for purchasing an EasyPro submersible LED pond and fountain light. With this

warm white LED light you can make your fountain glow, illuminate your pond from within,

highlight your waterfall and extend the enjoyment of your water feature in the evening

hours. The BFL lights can be used in the landscape out of the water or as a submersible

underwater light. Five year limited warranty.

BFL Light Specs:

1. Stainless Steel top plate with epoxy coated zinc/aluminum alloy housing

2. IP68 rated

3. Beam angle: 30 degrees

4. 12 Volt AC; with integrated driver

5. Non-dimmable

6. 2800-3000K color temperature

7. 115 lumens per watt

8. 15' power cord with bare leads

Safety and Electrical Connections:

1. Always disconnect the electrical supply before handling, maintaining, repairing

or installing any pond equipment.

2. Light(s) must be attached to a 12 volt AC transformer.

3. Never hook the lights directly to a 120 volt or higher outlet.

4. Connect the transformer only to a 120 volt receptacle that is protected by a Ground

Fault Circuit Interrupter (GFCI).

5. Do not use this product in bathrooms or swimming pools.

Light

Watts

BFL9

9 watt

BFL12 12 watt

BFL18 18 watt

Fits Pipe Size

(Sch 40 PVC)