HTC H1920 서비스 매뉴얼 - 페이지 32

{카테고리_이름} HTC H1920에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HTC H1920 36 페이지. Cell phone

C. Download boot-loader or O.S image (from SD card to iPAQ):

1) Insert SD card loaded with boot-loader and O.S image to Unit.

2) Press and hold Power key then Reset.

3) Wait a while then proceeds the re-flash process.

4) After the re-flash done, please take out the SD card. It will take approx 6 minutes then cold boot

your unit (Power button + reset).

D. Key-in Serial number and Country ID

1) Insert SD card with Diag program loaded, press and hold power button then reset.

2) Wait until HTC copyright appears and press action to enter the Diag program.

3) Press power button to enter the item of "key-in S/N and country ID".

4) Connect USB sync cable between PC and your iPAQ.

5) Execute Mtty1.4 on PC and Choose the USB port and press "OK". < Figure I>

6) Enter the original S/N and country ID <Figure II>

7) You can check the asset viewer under diag program if it works.

Figure I

Figure II

HTC confidential

TOTAL 36

CONT.ON. 33 PAGE NO. 32