EasyPro EPLK2 작동 지침

{카테고리_이름} EasyPro EPLK2에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. EasyPro EPLK2 4 페이지. 20 watt, 12 volt, submersible underwater lights

EPL20 • EPLK1 • EPLK2 • RL20

Thank you for purchasing the EasyPro submersible pond

light. With this pond light you can make your fountain glow,

illuminate your pond from within, highlight your waterfall

and extend the enjoyment of your water feature in the eve-

ning hours. This light is full submersible and carries a three

year limited warranty. You can also change the bulb to a

different wattage if you need more illumination, by simply

changing the bulb. Replacement bulbs are available. The

EPL20 lights can be purchased individually or as a kit with

one or two lights and a transformer.

Safety and Electrical Connections:

Always disconnect the electrical supply before

handling, maintaining, repairing or installing any

pond equipment.

Light(s) must be attached to a 12 volt UL listed trans-

former.

Never hook the lights directly to a 110 volt or higher

outlet.

Connect the transformer only to a 110 volt receptacle that is protected by a Ground

Fault Circuit Interrupter.

Do not use this product in bathrooms or swimming pools.

All electrical work must be performed by a qualified technician. Always follow the National

Electrical Code (NEC) or the Canadian Electrical Code as well as all local, state and provincial

codes. Code questions should be directed to your local electrical inspector. Failure to follow

electrical codes and OSHA safety standards may result in personal injury or equipment dam-

age. Failure to follow manufacturer's installation instructions may result in electrical shock, fire

hazard, personal injury or death, damaged equipment, provide unsatisfactory performance and

may void manufacturer's warranty.

20 Watt, 12 Volt, Submersible

Underwater Lights

Instructions for Operation • Safety • Warranty