EasyPro LED18WW 작동, 안전, 보증에 대한 지침

{카테고리_이름} EasyPro LED18WW에 대한 작동, 안전, 보증에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. EasyPro LED18WW 2 페이지. 9, 12 & 18 watt submersible, warm white
EasyPro LED18WW에 대해서도 마찬가지입니다: 작동 지침 (2 페이지)

페이지 인쇄

Underwater LED Light

Instructions for Operation • Safety • Warranty

Thank you for purchasing an EasyPro submersible LED pond

light. With this warm, white LED light you can make your

fountain glow, illuminate your pond from within, highlight your

waterfall and extend the enjoyment of your water feature in

the evening hours. Lights can be used in the landscape out

of the water or as a submersible underwater light with other

warm white LED or halogen fixtures.

LED9WW/LED12WW/LED18WW Specs:

• Housing type: 316 stainless steel

• LED9WW Lumens per watt: 137

• LED12WW/LED18WW Lumens per watt: 115

• Color Temperature: 2800-3000 K

• Power usage at 12V AC: 9, 12 or 18 watts

• Power cable: 30 ft, bare leads

• Integrated driver

• LED9WW 22° beam angle

• LED12WW/LED18WW 30° beam angle

• 5 year warranty

Safety and Electrical Connections:

1 Always disconnect the electrical supply before handling,

maintaining, repairing or installing any pond equipment.

2 Light(s) must be attached to a 12 volt UL listed magnetic

transformer.

3 Never hook the lights directly to a 120 volt or higher outlet.

4 Connect the transformer only to a 120 volt receptacle that is protected by a Ground

Fault Circuit Interrupter (GFCI).

5 Do not use this product in bathrooms or swimming pools.

6 All electrical work must be performed by a qualified technician. Always follow the

National Electrical Code (NEC) or the Canadian Electrical Code as well as all local,

9, 12 & 18 Watt Submersible, Warm White

LED9WW • LED12WW • LED18WW

LED9WW

LED12WW

LED18WW