HTC Inspire 4G 수리 매뉴얼 - 페이지 2
{카테고리_이름} HTC Inspire 4G에 대한 수리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HTC Inspire 4G 5 페이지. Lcd & touch screen repair
HTC Inspire 4G에 대해서도 마찬가지입니다: 사양 (1 페이지), 빠른 시작 매뉴얼 (24 페이지)
페이지 인쇄For more instructional repair guides for other makes or models, view our full catalog of
This written guide for the HTC Inspire will walk you through fully disassembling and replacing nearly all internal
components. This guide has been compiled by the RepairsUniverse team and can be used to safely and quickly replace
damaged or faulty parts, such as a cracked glass touch screen digitizer, damaged LCD display, and even faulty speakers.
Our screen repair guide for the Inspire / Desire HD are basic installation instructions for screens but can also be used to
repair nearly any internal component.
This guide will help you to install the following HTC Inspire 4G part(s):
•
HTC Inspire 4G LCD Replacement Display
•
HTC Inspire 4G Touch Screen Digitizer Replacement
•
HTC Inspire 4G Housing Assembly Replacement
•
HTC Inspire 4G Loud Speaker Replacement
•
HTC Inspire 4G Earpiece Speaker Replacement
•
HTC Inspire 4G Sim Card Tray Replacement
•
Other
HTC Inspire 4G Parts
Tools Required:
•
Safe open pry tool
•
Small Phillips
•
Torx T5 Screwdriver
•
Heat Gun / Hair Dryer
HTC Inspire 4G Screen Repair Take Apart Guide:
•
The first step will be to remove the battery. To do this, remove the long cover located on the side of the phone.
With the cover removed, you can then slide the battery out.
•
Now, remove the cover located at the bottom of the phone.
•
The next step will be to remove the cover located next to the camera. This one is a bit more secure in place and
may take some time to work out. Use a pry tool to slowly lift the cover, being sure not to damage the clips holding
it in place. You may need to press it out from the inside. There are many methods to do this, the key is using
something strong and thin to work through the battery slot (without damaging internal components) and then
forcing the cover up, from the inside.
•
With all of the housing covers removed, remove the five (5) torx T-5 screws (red circle). One is located by the
GPS / Flash cover, two are located on the battery side cover, and the final two are located on the edges of the
bottom cover.
•
Remove the small metal plate from the bottom left of the bottom cover (yellow). You will then need to remove the
sticker/product label in the battery compartment. This will give you access to the volume button flex cable. Gently
remove the cable from behind the volume button, be cautious as this is very fragile. Once the cable is lifted from
the housing, you can proceed.
Repair
Guides!