HTC Touch Pro 빠른 시작 매뉴얼

{카테고리_이름} HTC Touch Pro에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HTC Touch Pro 2 페이지. Touch pro
HTC Touch Pro에 대해서도 마찬가지입니다: 시작하기 (13 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (41 페이지), 매뉴얼 (38 페이지), 빠른 시작 매뉴얼 (32 페이지)

HTC Touch Pro
Read First Poster
Barcode
P/N
2

Your Device

Left, Front, and Bottom View
VOLUME UP
VOLUME DOWN
NAVIGATION
CONTROL/ENTER
TALK/SEND
Microphone
Sync Connector/Earphone
Jack/TV Out
3

Battery and Power

Installing the Battery

1.
Make sure your device is turned off.
2.
Hold the device with both hands and
the front panel facing down. Push the
back cover up with your thumb until it
disengages from the device and then
slide it up to remove.
3.
Align the battery's exposed copper
contacts with the battery connectors
inside the battery compartment. Insert
the contact's side of the battery first
and then gently push the battery into
place.
4.
Replace the back cover.

Charging the Battery

1.
Connect the USB connector of the AC charger to the sync connector on the
bottom of your device.
2.
Plug in the AC charger to an electrical outlet to start charging the battery. The
battery is fully charged after about 3 hours of charging.
4

Using the Phone

Making your first call

1.
Tap Start > Phone or press the TALK/SEND button.
2.
Tap the keys on the keypad to enter the phone number.
3.
Press the TALK/SEND button to place the call.
Dial the phone number
Earpiece
Hardware Keyboard
Touch Screen
BACK
HOME
END
Reset
button
Press TALK/SEND
1
What's in the Box
HTC Touch Pro Smartphone
Standard Lithium Ion Battery
AC Charger
Mini USB Sync and Charging Cable
Multifunction Audio Cable
Read First Poster and Quick Reference Guide
Getting Started CD (includes User Guide)
VZ Access Manager CD
Spare Stylus
Top, Back, and Right View
POWER
3.2 Megapixel Camera
Flash Light
Back Cover
Starting Up
After installing the battery and charging the battery, you can now power on and
start using your device.
1.
Press and hold the POWER button on top of the device for a few seconds.
2.
A Quick Start Wizard guides you through the calibration of the screen and the
setup of regional settings, date and time, and password. Follow the onscreen
instructions to finish the Quick Start Wizard. After the Quick Start Wizard
finishes, you may start using your device.

Sleep Mode

When the device is turned on, press and immediately release the POWER button to
turn off the display temporarily and switch your device to Sleep mode. Sleep mode
suspends your device to a low power state while the display is off in order to save
battery power.
Your device automatically goes into Sleep mode when you leave the device idle
after a certain period of time.
You will still be able to receive messages and calls while your device is in Sleep
mode. Pressing the POWER button again, removing the stylus, or incoming calls or
messages will wake up your device.
Answering a Call
Tap Answer or press TALK/SEND on the
device to answer an incoming call.
In-Call Options
Mute/unmute
the call
Stylus
End a Call
Tap End Call or press END on the
device to hang up.
Open Notes
Turn on/off the
Speakerphone