페이지 인쇄HTC U12+
___
Inserting nano SIM and microSD cards
IMPORTANT:
Charge the battery.
Before turning on the phone for the first time, charge the battery
for several minutes.
Use a standard nano SIM only.
Don't cut a micro or regular SIM card and insert it into the
nano SIM slot. It's thicker than the standard nano SIM card and
may get stuck in the slot.
Don't disassemble any part of the phone.
Don't try to open the phone or remove the battery by force. This
may damage the phone or its electronics and will invalidate the
warranty.
Don't throw the tray away.
You need it to insert your nano SIM and microSD™ cards.
1
2
gold contacts
nano SIM
cut-off corner
1. With the phone facing up,
insert the tip of the tray
eject tool that came in
the box (or a small bent
paperclip) into the tray
eject hole.
Push the tip all the way
into the hole until the
card tray ejects and then
gently pull the tray out.
2. With the nano SIM card's
gold contacts facing down,
place the card into the
SIM holder of the tray.
Make sure to align the
cut-off corner to the notch
on the holder.