HTC Vive Enterprise 일괄 구성 - 페이지 6

{카테고리_이름} HTC Vive Enterprise에 대한 일괄 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. HTC Vive Enterprise 15 페이지. Device management system
HTC Vive Enterprise에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지)

페이지 인쇄
HTC Vive Enterprise 일괄 구성
6
Batch configuration
7.
Enter the names for the app and app package.
<set name="plenty">
<item name="app name">xxxx</item>
<item name="app_package_name">xxxx</item>
</set>
§ To find the package name, enter #adb dumpsys app | grep package.
§ Duplicate <set/> to add more app entries.
8.
Save the file.

Enabling and disabling features

Turn on or off features such as the virtual wall, Wi-Fi settings, custom boot-up animation, and
automatic system updates.
1.
In the folder where you extracted the contents of the batch configuration template
package, open the xml folder. See
package
on page 4.
2.
Inside the folder, open the cc_config.xml file using a text editor app.
3.
Enter the corresponding text and value of each feature to enable or disable a feature.
Update the x value in each setting to 1 (enabled) or 0 (disabled).
For example, <enableUSBdebug>1</enableUSBdebug>.
See
Available features
the headset.
4.
Save the file.
§ See
Feature version requirements
each feature.
§ To connect VIVE Focus to a specificWi-Fi network, the <hasWIFISettings> value must be
set to 1. See
Configuring the Wi-Fi settings file
§ If the <hasAnimationZip> value is set to 1, you need to prepare your custom boot-up
animation for packaging. See
§ If you have an alternative headset tracking solution, in addition to the current one being used
by the headset, set the <DisableLostTracking> value to 1.
§ For <SetPlayareaSize>, you can enter 2x2, 3x3, or 4x4. Dimensions are in meters.
Downloading the batch configuration template
on page 7 for a complete list of features that be configured for
on page 14 to check the system version requirement for
on page 8.
Preparing the custom boot-up animation
on page 8.