HTC 420 VS 매뉴얼 - 페이지 10
{카테고리_이름} HTC 420 VS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HTC 420 VS 50 페이지. Floor grinder | concrete floor sander
HTC 420 VS에 대해서도 마찬가지입니다: 사용자 설명서 (46 페이지)
페이지 인쇄Introduction
a section of text, you must pay particular attention when reading
through the text and not carry out any operations of which you are
unsure. This is for your own and other users' safety and to avoid
damage to machinery or other equipment.
This symbol means Note! and indicates a potential risk of material
damage in the event of incorrect use of the machine or associated
equipment. If you see this symbol next to a section of text, you
must pay particular attention when reading through the text and not
carry out any operations of which you are unsure. This is to avoid
damage to the machinery or other equipment.
This symbol means Tip! You can get tips and advice on ways
to make operating your machine or associated equipment easier,
and to avoid wear. If you see this symbol next to a section of text,
you should read through the text to make your work easier and to
extend the service life of the machine.
1.4. Transportation
The machine is best transported secured to a load pallet.
1.5. On delivery
The following items are included on delivery. Contact your retailer
if anything is missing.
•
•
•
•
•
•
•
•
2
Grinder
Manual
Locking key for control cabinet
Hammer EZ system
Splash guard
Electrical cable with contact
EZ Grinding holders
Upper belt (spare part)
HTC 420 VS
2.0