HTC EMF-523 사용자 설명서 - 페이지 27

{카테고리_이름} HTC EMF-523에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HTC EMF-523 32 페이지. Rf three-axis field strength meter

EMF-523
frequency of a single signal is known. The field
strength value measured internally is multiplied by
the value of CAL that has been entered and the
resulting value is displayed. The CAL factor is
often used as a means of entering the sensitivity
of the field sensor in terms of its frequency
response in order to improve measurement
accuracy.

11 Making measurements

Important :
The following effect will be noted with all field
strength meters:
If the sensor is moved quickly, excessive field
strength values could be displayed. This effect is
caused by electrostatic charges.
Recommendation :
Hold the meter steady during the measurement.

12 Short-term measurements

Application :
Use either the "instantaneous" or the "Max.
instantaneous" mode, if the characteristics and
orientation of the field are unknown when entering
an area exposed to electromagnetic radiation.
24