EasyPro TH150 작동, 안전, 보증에 대한 지침

{카테고리_이름} EasyPro TH150에 대한 작동, 안전, 보증에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. EasyPro TH150 4 페이지. High quality, stainless steel, submersible pumps

TH150 • TH250 • TH400 • TH750

TH Series Submersible Pumps

Thank you for purchasing the TH series waterfall pump.

These stainless steel waterfall pumps are designed for con-

tinuous duty use. These pumps are a great choice for water-

falls, pond fountains and similar applications. The compact

design makes them great for skimmers. The pumps are built

with overload protections, thermal overload protection and

auto reset. The pumps come standard with a 2" NPT outlet.

Safety & Electrical Connections

Always disconnect the electricity supply before han-

dling, maintaining, repairing or installing any pond

equipment.

Always make sure you know the correct amps and

voltage required before installing.

EP waterfall pumps come in both 115 volt and 230 volt.

Always connect to a Ground Fault Circuit (GFCI).

Never let the pump run without water as this will dam-

age the impeller, over heat the pumps and possibly

burn out the pump.

Do not use this product in bathrooms or swimming pools.

Do not let the water level in your water feature fall below the top of the pump body.

All electrical work must be performed by a qualified technician. Always follow the National

Electrical Code (NEC) or the Canadian Electrical Code as well as all local, state and provincial

codes. Code questions should be directed to your local electrical inspector. Failure to follow

electrical codes and OSHA safety standards may result in personal injury or equipment dam-

age. Failure to follow manufacturer's installation instructions may result in electrical shock, fire

hazard, personal injury or death, damaged equipment, provide unsatisfactory performance and

may void manufacturer's warranty.

Always operate the pump in a skimmer or a submersible pump screen.

High Quality, Stainless Steel

Instructions for Operation • Safety • Warranty