EasyPro EC1300U 작동, 안전, 보증에 대한 지침 - 페이지 6

{카테고리_이름} EasyPro EC1300U에 대한 작동, 안전, 보증에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. EasyPro EC1300U 8 페이지. Eco-clear pressurized filters

페이지 인쇄

5. Remove the two screws and the plastic retainer clip that holds the cord in place.

6. Unscrew the clear plastic UV lamp connector nut and carefully remove from housing.

7. Carefully set the UV assembly aside being careful not to touch the UV lamp. If you are

replacing the UV lamp, follow the instructions above.

8. Gently pull straight up on the treaded connection in the middle and remove the UV housing.

9. Be sure to use caution as the quartz sleeve is glass and can break. If the sleeve is broken use

proper protection for your hands and eyes while cleaning glass from the filter.

10. To remove the sleeve from the UV housing, unscrew the top

fitting. The glass section is secured to the top section and the

whole piece will be replaced.

11. Thread the new quartz sleeve assembly onto the UV housing.

12. Reuse the black end piece from the old sleeve and place on the

new sleeve.

13. Carefully replace the UV housing into the filter. Be sure it is

seated properly.

14. Replace the UV lamp assembly and screw it back in place being

careful not to touch the UV lamp.

15. Reattach the cord retainer clip with the two screws.

16. Line up the cord properly in the housing and replace the top cover and circular retaining

ring. Secure with the six screws.

17. Return the unit back to service.

Filter Specifications

Maximum Pond Size with Fish* (gallons)

Maximum Pond Size without Fish* (gallons)

UV/Watts

Inlet/Outlet Sizes

Recommended maximum GPH

Volts / Frequency

Cord Length

*Fish load, amount of sunlight, etc. all affect actual maximum gallons filtered.

14.80"

15.47"

EC1300

1300

12.24"

Step 10

EC1300U

650

1300

n/a

9 Watts

", 1"

1300

n/a

115 V / 60 Hz

n/a

16 feet

650

", 1"