EasyPro ECF10 사용 설명서 지침 - 페이지 3

{카테고리_이름} EasyPro ECF10에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. EasyPro ECF10 8 페이지. Dual filtration, high quality pressurized filters

Lamp Replacement

1. Make sure the unit is

disconnected from the

power source.

2. For the ECF10 (U)

proceed to step three,

then proceed to step

five and continue. For

the ECF25 (U) and

ECF40 (U) proceed to

step four, then pro-

ceed.

3. Loosen the screws on the top retaining ring. Do not

remove the screws - do not remove the retaining

ring. Twist the UV

housing and match

the arrow on the UV

cover with the arrow

on the retaining ring.

Gently pull up on the

cord and cover in the

back to loosen the UV

cover. (see figure 1

and 9)

4. Loosen and remove

the three screws on

top of the UV cover.

(see figure 2)

5. Remove the UV cover and set aside. (see figures 3 &

6. Remove the two screws and the plastic retainer clip

that hold the cord in place and set aside. (see figure 5)

7. Unscrew the UV light and carefully remove from the

housing. (see figure 6)

Figure 5

Figure 1

Figure 3

Figure 2

Figure 4

Figure 6