EasyPro WFL3 작동, 안전, 보증에 대한 지침

{카테고리_이름} EasyPro WFL3에 대한 작동, 안전, 보증에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. EasyPro WFL3 8 페이지. Fountain light kit, stainless steel, warm white led light kits, two-light or three-light kits for use on easypro 1/2 and 1 hp aqua fountains or kasco 1/2 to 2 hp vfx, af or jf series fountains

페이지 인쇄

Stainless Steel, Warm White LED Light Kits

Two-light or three-light kits for use on

EasyPro 1/2 and 1 hp Aqua Fountains or

Kasco 1/2 to 2 hp VFX, AF or JF series fountains

Instructions for Operation • Safety • Warranty

Thank you for purchasing the WFL2 or WFL3 Warm White LED fountain light kit.

This kit will transform your fountain into a beautiful night time display.

These low voltage lights use only 12 watts per fixture.

Safety and Electrical Connections

Never enter water with electrical connections plugged in or in

operation. Even though units are supposed to be connected to GFCI

protection, it is NEVER recommended to enter water with equipment in

operation.

2. Lights must be attached to matching 2 pin cords and 2 pin 12 volt AC

controller as provided.

3. Never connect the lights directly to a 110 volt or higher outlet.

4. Connect the supplied controller/transformer to a 110 volt receptacle that is

protected by a Ground Fault Circuit Interrupter.

5. Do not modify wiring in any way, quick plug ends must stay intact to

function and should not be replaced with any other connections.

6. Not approved for swimming pool or spa use.

7. All electrical work must be performed by a qualified technician. Always follow

the National Electrical Code (NEC) or the Canadian Electrical Code as well as

all local, state and provincial codes. Failure to follow manufacturer's installation

instructions may result in electrical shock, fire hazard, personal injury or

death, damaged equipment, provide unsatisfactory performance and will void

manufacturer's warranty.

WFL2 • WFL3

Fountain Light Kit