EasyPro WLC4 작동, 안전, 보증에 대한 지침

{카테고리_이름} EasyPro WLC4에 대한 작동, 안전, 보증에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. EasyPro WLC4 4 페이지. Controller with digital timer

Instructions for Operation

Thank you for purchasing the controller for

warm white lights from EasyPro.

These controllers will power up to 2, 4 or 6

2 pin LED lights depending

Controller Features and Includes

•

Weatherproof with mounting holes

•

Built in digital timer

•

Built in voltage regulator for adequate voltage for lights up to 300' away

•

115 volt input with 12v AC output

•

Pigtail with 2 pin receptacle and quick connect end.

Safety and Electrical Connections

Always disconnect the electrical supply before handling, maintaining,

repairing or installing any pond equipment.

2. Do not open the controller. There are no serviceable parts inside the

controller.

3. Connect the 110 volt plug of the controller/transformer to a 110 volt

receptacle that is protected by a Ground Fault Circuit Interrupter.

4. Do not modify wiring in any way, quick plug ends must stay intact to

function and should not be replaced with any other connections.

5. Do not use with swimming pools or spas.

6. Only connect to matching 2 pin cords, splitters and lighting fixtures.

7. All electrical work must be performed by a qualified technician. Always follow

the National Electrical Code (NEC) or the Canadian Electrical Code as well as

all local, state and provincial codes. Failure to follow manufacturer's installation

instructions may result in electrical shock, fire hazard, personal injury or

death, damaged equipment, provide unsatisfactory performance and will void

manufacturer's warranty.

WLC2 • WLC4 • WLC6

Controller

with Digital Timer

Safety • Warranty

on the model.