Bioness Ness H200 사용자 참조 설명서 - 페이지 2

{카테고리_이름} Bioness Ness H200에 대한 사용자 참조 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bioness Ness H200 2 페이지.
Bioness Ness H200에 대해서도 마찬가지입니다: 임상의 참조 카드 (2 페이지)

페이지 인쇄
Bioness Ness H200 사용자 참조 설명서
Operating the NESS H200 Wireless System
RF Communication
Indicator
Control Unit
Status Indicator
Intensity Level
Turn on the system. Press the
1
Test the position of the Orthosis. Press and hold the
2
test the extensor muscles. Release the button and press and hold again to test the flexor
muscles. Repeat as needed.
Select Program 1 or Program 2. Press the Program 1 or Program 2 selection button on
3
the side of the Control Unit. The selected program indicator will be GREEN:
If necessary, adjust the stimulation intensity level. Press the
4
button to increase/decrease stimulation intensity in the Orthosis.
Start a program. Press the
5
the Orthosis to turn on stimulation. To pause/resume a program, press the trigger button
on the Control Unit or the trigger button on the Orthosis.
Note: Neuroprosthesis Programs cannot be paused. Pressing the trigger button when
stimulation is on initiates the next phase of the program. To turn off stimulation, press the
on/off button.
H200 Wireless Control Unit Displays
On/Off Button Flashes Green
Trigger Button Flashes Yellow Rapidly
Trigger Button is a Steady Yellow
Program 1 Indicator is Green
Program 2 Indicator is Green
Control Unit Status Indicator is a Steady Red
RF Communication Indicator Flashes Red
Rx Only
(US Only)
For a complete list of all contraindications, warnings, adverse reactions, precautions, and care instructions please
review the User's Guide found at www.bioness.com.
© 2015
NESS
, NESS H200
Wireless, Bioness, the Bioness Logo
®
®
1
On/Off Button
Program 1 Indicator
Program 2 Indicator
on/off button.
trigger button on the Control Unit or the trigger button on
and LiveOn
are registered trademarks of Bioness Inc. in the United States or other countries. | www.bioness.com
®
®
Trigger Button
5
4
stimulation test button once to
System is On
Stimulation is On
Stimulation is Paused
Program 1 Selected
Program 2 Selected
Control Unit Malfunction: Charging Error; Registration
Error; Software Error
RF Communication Error
Intensity Adjustment Buttons
Mute Button
Program 1
Selection Button
3
Program 2
Selection Button
Stimulation Test
2
Button
or
plus or
.
minus