Bioness StimRouter 임상의 참조 카드

{카테고리_이름} Bioness StimRouter에 대한 임상의 참조 카드을 온라인으로 검색하거나 PDF를 다운로드하세요. Bioness StimRouter 2 페이지. Neuromodulation system
Bioness StimRouter에 대해서도 마찬가지입니다: 사용자 참조 카드 (2 페이지)

페이지 인쇄

Neuromodulation System

Clinician's Reference Card

Programming Set-Up

1. Log into the StimRouter Clinician's Software.

2. Connect the Patient Programmer to the Clinician Programmer via the Programmer

Connector Cable.

3. Create a new patient record or open an existing patient record.

StimRouter Electrode/External Pulse Transmitter (EPT) Set-Up

1. After the EPT is charged, snap the EPT onto the StimRouter Electrode.

2. Remove the electrode liner and store it in the StimRouter Electrode Carrying Case.

3. Grasp the edges of the EPT attached to the StimRouter Electrode so the gel pads face down.

4. Adhere the end of the StimRouter Electrode, that has the EPT charging port, directly over the

receiver end of the lead.

Note: The center of the gel pad should be above the receiver end of the lead.

Software Navigation

Settings Tabs

Program Bar

Intensity Level Bar

Menu Bar

Bioness Inc.

25103 Rye Canyon Loop

Valencia, CA 91355 USA

Telephone: 800.211.9136 or 661.362.4850

Website: www.bioness.com

Save Icon

Print Icon

Delete

Program

See Clinician's

Add

Program

Guide