Dickey-John CSS 110 매뉴얼 - 페이지 7
{카테고리_이름} Dickey-John CSS 110에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dickey-John CSS 110 13 페이지. Automatic sprayer controller
페이지 인쇄
OPERATOR'S MANUAL
App. Rate
01.20
l/m2
App. Rate +/-
00.10
l/m2
Nozzle spacing
167.0
mm
Number of nozzles
18
CSS 110 Automatic Sprayer Controller
11001-1679-201606
SETUP
Basic programming of constants is required prior to using the CSS 110.
To begin programming:
1. Press the OK button to power on. Wait for the Main screen to display.
2. Press the Menu button.
3. Use the + or - keys to scroll and select the desired constants to
change.
4. Press the OK button to confirm and program to desired setting.
CONSTANTS DEFINED
APP RATE
Application Rate displays in volume/area
– Press the OK button once. The decimal point will flash. Use the + or
- button to move to the desired position.
– Press the OK button to confirm and program to desired setting.
APP RATE +/-
The instantaneous increase or decrease of the application rate in volume/
area.
– Press + and - buttons at the Main screen to increase or decrease
the application by the amount displayed.
– Press the OK button to confirm and program to desired setting.
NOZZLE SPACING
Distance between nozzles.
– Press the OK button to move the decimal point using the + and -
buttons.
– Press the OK button to confirm and program to desired setting.
NUMBER OF NOZZLES
Total number of nozzles used.
– Enter total number of nozzles.
– Press the OK button to confirm and program to desired setting.
IMPORTANT: Replacing nozzles with different characteristics and
dimensions requires an update to the Nozzle Pressure
and Nozzle Flow screens.
SETUP / 5